# smartctl -a /dev/sdl
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.1.0-rc4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     OCZ-REVODRIVE3 X2
Serial Number:    OCZ-2R1N661BJ161F5I8
LU WWN Device Id: 5 e83a97 e97e68087
Firmware Version: 2.11
User Capacity:    120 034 123 776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ACS-2 revision 3
Local Time is:    Sun Oct 30 23:33:32 2011 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 2097) seconds.
Offline data collection
capabilities:                    (0x7f) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Abort Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  48) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x0021) SCT Status supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   089   089   050    Pre-fail  Always       
-       177459568
  5 Reallocated_Sector_Ct   0x0033   100   100   003    Pre-fail  Always       
-       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       
-       103680510525522
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       6
171 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       
-       0
172 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       
-       0
174 Unknown_Attribute       0x0030   000   000   000    Old_age   Offline      
-       3
177 Wear_Leveling_Count     0x0000   000   000   000    Old_age   Offline      
-       0
181 Program_Fail_Cnt_Total  0x0032   000   000   000    Old_age   Always       
-       0
182 Erase_Fail_Count_Total  0x0032   000   000   000    Old_age   Always       
-       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       
-       0
194 Temperature_Celsius     0x0022   128   129   000    Old_age   Always       
-       128 (Min/Max 127/129)
195 Hardware_ECC_Recovered  0x001c   120   120   000    Old_age   Offline      
-       177459568
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       
-       0
201 Soft_Read_Error_Rate    0x001c   120   120   000    Old_age   Offline      
-       177459568
204 Soft_ECC_Correction     0x001c   120   120   000    Old_age   Offline      
-       177459568
230 Head_Amplitude          0x0013   100   100   000    Pre-fail  Always       
-       170261093548132
231 Temperature_Celsius     0x0013   100   100   010    Pre-fail  Always       
-       0
233 Media_Wearout_Indicator 0x0000   000   000   000    Old_age   Offline      
-       157
234 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       
-       35
241 Total_LBAs_Written      0x0032   000   000   000    Old_age   Always       
-       35
242 Total_LBAs_Read         0x0032   000   000   000    Old_age   Always       
-       3511

SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

-- реклама -----------------------------------------------------------
Никогда не покупали в интернете?
Лучшее место для покупок онлайн - http://aukro.ua


------------------------------------------------------------------------------
Get your Android app more play: Bring it to the BlackBerry PlayBook 
in minutes. BlackBerry App World™ now supports Android™ Apps 
for the BlackBerry® PlayBook™. Discover just how easy and simple 
it is! http://p.sf.net/sfu/android-dev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to