Hello,
attached the txt-file:
This internal TOSHIBA MK5055GSX Harddisk (500 GB) apparently is not in
your database.
Also, what I find irritating, when running a long offline test, after
completing 90 % of the test it somehow stops (as shown in the txt-file),
there is no more progress, no matter how long one waits. I wonder if
this is due to damages on the disk, or to the program?
I really would like to get an accurate idea of the status of the disk,
obviously it is an older one, but I would like to keep on using it, but
with minimizing my risks.
However, the short test works, with a "passed" result (shown in the
txt-file).
Thank you!
Greetings,
Philipp
ubuntu@ubuntu:~$ sudo smartctl -t short /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-12-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line
mode".
Drive command "Execute SMART Short self-test routine immediately in off-line
mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Tue Jan 17 17:33:21 2012
Use smartctl -X to abort test.
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-12-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK5055GSX
Serial Number: Z8CCF00WS
LU WWN Device Id: 5 000039 176d02fea
Firmware Version: FG001A
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jan 17 17:35:22 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 187) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline
- 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always
- 1643
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 2214
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always
- 5
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline
- 0
9 Power_On_Hours 0x0032 081 081 000 Old_age Always
- 7649
10 Spin_Retry_Count 0x0033 144 100 030 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 2088
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 145
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 249
193 Load_Cycle_Count 0x0032 096 096 000 Old_age Always
- 49960
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 38 (Min/Max 10/58)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 5
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always
- 52
222 Loaded_Hours 0x0032 090 090 000 Old_age Always
- 4216
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always
- 0
224 Load_Friction 0x0022 100 100 000 Old_age Always
- 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always
- 350
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline
- 0
SMART Error Log Version: 1
ATA Error Count: 3407 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3407 occurred at disk power-on lifetime: 7224 hours (301 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 1a 2a c1 e9 Error: UNC 1 sectors at LBA = 0x09c12a1a = 163654170
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 1a 2a c1 e0 00 03:11:57.803 READ DMA EXT
35 00 08 77 00 60 e0 00 03:11:57.802 WRITE DMA EXT
ef 03 45 00 00 00 a0 00 03:11:57.801 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff 0c 03:11:57.790 [VENDOR SPECIFIC]
25 00 01 1a 2a c1 e0 00 03:11:53.727 READ DMA EXT
Error 3406 occurred at disk power-on lifetime: 7224 hours (301 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 1a 2a c1 e9 Error: UNC 1 sectors at LBA = 0x09c12a1a = 163654170
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 1a 2a c1 e0 00 03:11:53.727 READ DMA EXT
25 00 01 55 66 4c e0 00 03:11:53.726 READ DMA EXT
25 00 04 95 66 4c e0 00 03:11:53.725 READ DMA EXT
25 00 01 55 66 4c e0 00 03:11:53.724 READ DMA EXT
25 00 20 55 66 4c e0 00 03:11:53.723 READ DMA EXT
Error 3405 occurred at disk power-on lifetime: 7221 hours (300 days + 21 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 1a 2a c1 e9 Error: UNC 16 sectors at LBA = 0x09c12a1a = 163654170
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 1a 2a c1 e0 00 00:00:03.566 READ DMA EXT
25 00 08 cf 39 60 e0 00 00:00:03.555 READ DMA EXT
25 00 08 8f 00 00 e0 00 00:00:03.554 READ DMA EXT
25 00 20 55 66 4c e0 00 00:00:03.553 READ DMA EXT
25 00 08 97 c9 08 e0 00 00:00:03.521 READ DMA EXT
Error 3404 occurred at disk power-on lifetime: 7220 hours (300 days + 20 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 1a 2a c1 e9 Error: UNC 1 sectors at LBA = 0x09c12a1a = 163654170
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 1a 2a c1 e0 00 00:04:35.461 READ DMA EXT
ef 03 45 00 00 00 a0 00 00:04:35.460 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff 0c 00:04:35.449 [VENDOR SPECIFIC]
25 00 01 1a 2a c1 e0 00 00:04:31.383 READ DMA EXT
ef 03 45 00 00 00 a0 00 00:04:31.382 SET FEATURES [Set transfer mode]
Error 3403 occurred at disk power-on lifetime: 7220 hours (300 days + 20 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 1a 2a c1 e9 Error: UNC 1 sectors at LBA = 0x09c12a1a = 163654170
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 1a 2a c1 e0 00 00:04:31.383 READ DMA EXT
ef 03 45 00 00 00 a0 00 00:04:31.382 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff 0c 00:04:31.371 [VENDOR SPECIFIC]
25 00 01 1a 2a c1 e0 00 00:04:27.305 READ DMA EXT
ef 03 45 00 00 00 a0 00 00:04:27.304 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 7648 -
# 2 Short offline Completed without error 00% 7648 -
# 3 Extended offline Aborted by host 10% 7646 -
# 4 Extended offline Aborted by host 10% 7642 -
# 5 Extended offline Aborted by host 10% 7634 -
# 6 Short offline Completed without error 00% 7626 -
# 7 Short offline Completed without error 00% 7625 -
# 8 Short offline Completed without error 00% 7625 -
# 9 Short offline Completed without error 00% 7625 -
#10 Extended offline Aborted by host 90% 7625 -
#11 Extended offline Aborted by host 10% 7625 -
#12 Short offline Completed without error 00% 7621 -
#13 Short offline Completed without error 00% 7451 -
#14 Extended offline Aborted by host 10% 7451 -
#15 Short offline Interrupted (host reset) 10% 7180 -
#16 Short offline Completed without error 00% 7168 -
#17 Short offline Completed without error 00% 7157 -
#18 Short offline Completed without error 00% 7143 -
#19 Short offline Completed without error 00% 7139 -
#20 Short offline Completed without error 00% 7128 -
#21 Short offline Completed without error 00% 7125 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ubuntu@ubuntu:~$ sudo smartctl -v /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-12-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=======> INVALID ARGUMENT TO -v: /dev/sda
=======> VALID ARGUMENTS ARE:
help
N,raw8[:012345rvwz][,ATTR_NAME]
N,raw16[:012345rvwz][,ATTR_NAME]
N,raw48[:012345rvwz][,ATTR_NAME]
N,hex48[:012345rvwz][,ATTR_NAME]
N,raw64[:012345rvwz][,ATTR_NAME]
N,hex64[:012345rvwz][,ATTR_NAME]
N,raw16(raw16)[:012345rvwz][,ATTR_NAME]
N,raw16(avg16)[:012345rvwz][,ATTR_NAME]
N,raw24/raw24[:012345rvwz][,ATTR_NAME]
N,raw24/raw32[:012345rvwz][,ATTR_NAME]
N,sec2hour[:012345rvwz][,ATTR_NAME]
N,min2hour[:012345rvwz][,ATTR_NAME]
N,halfmin2hour[:012345rvwz][,ATTR_NAME]
N,msec24hour32[:012345rvwz][,ATTR_NAME]
N,tempminmax[:012345rvwz][,ATTR_NAME]
N,temp10x[:012345rvwz][,ATTR_NAME]
9,halfminutes
9,minutes
9,seconds
9,temp
192,emergencyretractcyclect
193,loadunload
194,10xCelsius
194,unknown
197,increasing
198,offlinescanuncsectorct
198,increasing
200,writeerrorcount
201,detectedtacount
220,temp
<=======
Use smartctl -h to get a usage summary
ubuntu@ubuntu:~$ sudo smartctl -h /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-12-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Usage: smartctl [options] device
============================================ SHOW INFORMATION OPTIONS =====
-h, --help, --usage
Display this help and exit
-V, --version, --copyright, --license
Print license, copyright, and version information and exit
-i, --info
Show identity information for device
-a, --all
Show all SMART information for device
-x, --xall
Show all information for device
--scan
Scan for devices
--scan-open
Scan for devices and try to open each device
================================== SMARTCTL RUN-TIME BEHAVIOR OPTIONS =====
-q TYPE, --quietmode=TYPE (ATA)
Set smartctl quiet mode to one of: errorsonly, silent, noserial
-d TYPE, --device=TYPE
Specify device type to one of: ata, scsi, sat[,N][+TYPE],
usbcypress[,X], usbjmicron[,x][,N], usbsunplus, marvell, areca,N, 3ware,N,
hpt,L/M/N, megaraid,N, cciss,N, auto, test
-T TYPE, --tolerance=TYPE (ATA)
Tolerance: normal, conservative, permissive, verypermissive
-b TYPE, --badsum=TYPE (ATA)
Set action on bad checksum to one of: warn, exit, ignore
-r TYPE, --report=TYPE
Report transactions (see man page)
-n MODE, --nocheck=MODE (ATA)
No check if: never, sleep, standby, idle (see man page)
============================== DEVICE FEATURE ENABLE/DISABLE COMMANDS =====
-s VALUE, --smart=VALUE
Enable/disable SMART on device (on/off)
-o VALUE, --offlineauto=VALUE (ATA)
Enable/disable automatic offline testing on device (on/off)
-S VALUE, --saveauto=VALUE (ATA)
Enable/disable Attribute autosave on device (on/off)
======================================= READ AND DISPLAY DATA OPTIONS =====
-H, --health
Show device SMART health status
-c, --capabilities (ATA)
Show device SMART capabilities
-A, --attributes
Show device SMART vendor-specific Attributes and values
-f FORMAT, --format=FORMAT (ATA)
Set output format for attributes to one of: old, brief
-l TYPE, --log=TYPE
Show device log. TYPE: error, selftest, selective, directory[,g|s],
background, sasphy[,reset], sataphy[,reset],
scttemp[sts,hist], scterc[,N,M],
gplog,N[,RANGE], smartlog,N[,RANGE],
xerror[,N][,error], xselftest[,N][,selftest]
-v N,OPTION , --vendorattribute=N,OPTION (ATA)
Set display OPTION for vendor Attribute N (see man page)
-F TYPE, --firmwarebug=TYPE (ATA)
Use firmware bug workaround: none, samsung, samsung2,
samsung3, swapid
-P TYPE, --presets=TYPE (ATA)
Drive-specific presets: use, ignore, show, showall
-B [+]FILE, --drivedb=[+]FILE (ATA)
Read and replace [add] drive database from FILE
[default is +/etc/smart_drivedb.h
and then /usr/share/smartmontools/drivedb.h]
============================================ DEVICE SELF-TEST OPTIONS =====
-t TEST, --test=TEST
Run test. TEST: offline short long conveyance vendor,N select,M-N
pending,N afterselect,[on|off] scttempint,N[,p]
-C, --captive
Do test in captive mode (along with -t)
-X, --abort
Abort any non-captive test on device
=================================================== SMARTCTL EXAMPLES =====
smartctl --all /dev/hda (Prints all SMART information)
smartctl --smart=on --offlineauto=on --saveauto=on /dev/hda
(Enables SMART on first disk)
smartctl --test=long /dev/hda (Executes extended disk self-test)
smartctl --attributes --log=selftest --quietmode=errorsonly /dev/hda
(Prints Self-Test & Attribute errors)
smartctl --all --device=3ware,2 /dev/sda
smartctl --all --device=3ware,2 /dev/twe0
smartctl --all --device=3ware,2 /dev/twa0
smartctl --all --device=3ware,2 /dev/twl0
(Prints all SMART info for 3rd ATA disk on 3ware RAID controller)
smartctl --all --device=hpt,1/1/3 /dev/sda
(Prints all SMART info for the SATA disk attached to the 3rd PMPort
of the 1st channel on the 1st HighPoint RAID controller)
smartctl --all --device=areca,3 /dev/sg2
(Prints all SMART info for 3rd ATA disk on Areca RAID controller)
------------------------------------------------------------------------------
Keep Your Developer Skills Current with LearnDevNow!
The most comprehensive online learning library for Microsoft developers
is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
Metro Style Apps, more. Free future releases when you subscribe now!
http://p.sf.net/sfu/learndevnow-d2d
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
