hermes:~# /tmp/smartmontools-5.42/smartctl -a /dev/sda
smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.34.7-hermes-001] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG MMCRE28G8MXP-0VBL1
Serial Number:    S0ENNEAZ608532
Firmware Version: VBM1EL1Q
User Capacity:    128,035,676,160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Mon Jan  9 18:31:37 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  240) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   4) minutes.
Extended self-test routine
recommended polling time:        (  24) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       
-       11431
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       
-       61
175 Program_Fail_Count_Chip 0x0032   100   100   010    Old_age   Always       
-       0
176 Erase_Fail_Count_Chip   0x0032   100   100   010    Old_age   Always       
-       0
177 Wear_Leveling_Count     0x0013   097   097   017    Pre-fail  Always       
-       145
178 Used_Rsvd_Blk_Cnt_Chip  0x0013   090   090   010    Pre-fail  Always       
-       6
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   098   098   010    Pre-fail  Always       
-       39
180 Unused_Rsvd_Blk_Cnt_Tot 0x0013   098   098   010    Pre-fail  Always       
-       3801
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       
-       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       
-       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       
-       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       
-       0
195 Hardware_ECC_Recovered  0x001a   200   200   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x003e   253   253   000    Old_age   Always       
-       0
233 Media_Wearout_Indicator 0x003a   199   199   000    Old_age   Always       
-       766198
234 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       
-       0
235 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       
-       0
236 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       
-       309
237 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       
-       579
238 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       
-       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Extended offline    Completed without error       00%     11430         -
# 2  Short offline       Completed without error       00%     11428         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

hermes:~# 

------------------------------------------------------------------------------
RSA(R) Conference 2012
Mar 27 - Feb 2
Save $400 by Jan. 27
Register now!
http://p.sf.net/sfu/rsa-sfdev2dev2
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to