Please find attached a submission for the disk ST960812A
smartctl 5.42 2011-10-20 r3458 [i686-w64-mingw32-win7] (sf-win32-5.42-1)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST960812A
Serial Number: 5PJ1ZYCQ
Firmware Version: 3.05
User Capacity: 60,011,642,880 bytes [60.0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Tue Apr 17 15:49:53 2012 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 39) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always
- 2198051
3 Spin_Up_Time 0x0002 097 096 000 Old_age Always
- 0
4 Start_Stop_Count 0x0033 098 098 020 Pre-fail Always
- 2067
5 Reallocated_Sector_Ct 0x0033 094 094 036 Pre-fail Always
- 260
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always
- 63328620
9 Power_On_Hours 0x0032 099 099 000 Old_age Always
- 1684
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0033 099 099 020 Pre-fail Always
- 1779
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always
- 56018
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 078 047 045 Old_age Always
- 22 (1 122 22 22 0)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 220
193 Load_Cycle_Count 0x0032 072 072 000 Old_age Always
- 57211
194 Temperature_Celsius 0x0022 022 053 000 Old_age Always
- 22 (0 6 0 0 0)
195 Hardware_ECC_Recovered 0x001a 084 050 000 Old_age Always
- 2630994
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202 Data_Address_Mark_Errs 0x0000 100 253 000 Old_age Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 1682 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
