Thanks for your answer !
> Did you try '-d ata' ?
Yes :
#######################################################################
ATA command routine ata_command_interface() NOT IMPLEMENTED under Solaris.
Please contact smartmontools-supp...@lists.sourceforge.net if
you want to help in porting smartmontools to Solaris.
#######################################################################
> The device type autodetection in os_solaris.cpp was not updated since 2003
> and is likely no longer suitable for current Solaris versions.
FYI, I have Solaris 10.
> Looks like garbage data is returned for the (now outdated) Summary SMART
> error log. May be a device or OS problem.
>
> Please try whether '-l xerror' provides a more reasonable result.
See attached file.
Can I clear the data (by running multiple short logs?)
> Probably. Running the test on another OS may return correct error log data.
I can't do that :(
However, here what I have :
I have 4 same disks with the same errors in SMART error log.
I have many other hosts with the same disks with no error log. (Log
attached, bottom of the file)
--
Théophile Helleboid
# smartctl -a /dev/rdsk/c8t5000CCA22BC24BC3d0 -l xerror -d sat
smartctl 5.42 2011-10-20 r3458 [i386-pc-solaris2.10] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HUS724040ALE640
Serial Number: PK2331PAG51KTT
LU WWN Device Id: 5 000cca 22bc24bc3
Firmware Version: MJAOA3B0
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Oct 2 09:35:05 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 24) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline
- 78
3 Spin_Up_Time 0x0007 144 144 024 Pre-fail Always
- 592 (Average 480)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always
- 13
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 117 117 020 Pre-fail Offline
- 36
9 Power_On_Hours 0x0012 100 100 000 Old_age Always
- 204
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 13
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 21
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always
- 21
194 Temperature_Celsius 0x0002 240 240 000 Old_age Always
- 25 (Min/Max 17/34)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 0
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 137 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 137 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 51 00 00 34 b7 00 08 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.988 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.987 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.980 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.979 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.971 [VENDOR SPECIFIC]
Error 136 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 51 00 00 34 b7 00 08 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.971 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.971 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.963 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.962 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.955 [VENDOR SPECIFIC]
Error 135 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 51 00 00 34 b7 00 08 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.938 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.938 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.930 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.929 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.921 [VENDOR SPECIFIC]
Error 134 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 51 00 00 34 b7 00 08 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.930 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.929 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.921 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.921 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00 00 00 00 00 00:16:33.914 [VENDOR SPECIFIC]
SMART Error Log Version: 1
ATA Error Count: 137 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 137 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 51 00 00 00 08 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ff 00 00 00 00 00 00 00 00:16:33.988 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.987 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.980 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.979 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.971 [VENDOR SPECIFIC]
Error 136 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 51 00 00 00 08 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ff 00 00 00 00 00 00 00 00:16:33.971 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.971 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.963 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.962 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.955 [VENDOR SPECIFIC]
Error 135 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 51 00 00 00 08 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ff 00 00 00 00 00 00 00 00:16:33.938 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.938 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.930 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.929 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.921 [VENDOR SPECIFIC]
Error 134 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 51 00 00 00 08 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ff 00 00 00 00 00 00 00 00:16:33.930 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.929 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.921 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.921 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.914 [VENDOR SPECIFIC]
Error 133 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 51 00 00 00 08 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ff 00 00 00 00 00 00 00 00:16:33.905 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.904 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.896 [VENDOR SPECIFIC]
c1 00 00 00 00 00 00 00 00:16:33.896 [VENDOR SPECIFIC]
ff 00 00 00 00 00 00 00 00:16:33.888 [VENDOR SPECIFIC]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 188 -
# 2 Short offline Completed without error 00% 62 -
# 3 Short offline Completed without error 00% 22 -
# 4 Short offline Completed without error 00% 22 -
# 5 Short offline Completed without error 00% 22 -
# 6 Short offline Completed without error 00% 18 -
# 7 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
# smartctl -a /dev/rdsk/c8t5000CCA22BC24BC3d0 -d ata
smartctl 5.42 2011-10-20 r3458 [i386-pc-solaris2.10] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
#######################################################################
ATA command routine ata_command_interface() NOT IMPLEMENTED under Solaris.
Please contact smartmontools-supp...@lists.sourceforge.net if
you want to help in porting smartmontools to Solaris.
#######################################################################
Smartctl: Device Read Identity Failed: Unknown error
A mandatory SMART command failed: exiting. To continue, add one or more '-T
permissive' options.
# uname -a
SunOS hostname 5.10 Generic_144501-19 i86pc i386 i86pc
# On an other System (but should be the same)
smartctl -a /dev/rdsk/c8t5000CCA22BC2507Fd0s2 -d sat -l xerror
smartctl 5.42 2011-10-20 r3458 [i386-pc-solaris2.10] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HUS724040ALE640
Serial Number: PK2331PAG52UWT
LU WWN Device Id: 5 000cca 22bc2507f
Firmware Version: MJAOA3B0
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Oct 2 09:40:24 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 24) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline
- 80
3 Spin_Up_Time 0x0007 125 125 024 Pre-fail Always
- 617 (Average 621)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always
- 15
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 117 117 020 Pre-fail Offline
- 36
9 Power_On_Hours 0x0012 100 100 000 Old_age Always
- 204
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 15
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 23
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always
- 23
194 Temperature_Celsius 0x0002 240 240 000 Old_age Always
- 25 (Min/Max 17/34)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 0
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 45 -
# 2 Short offline Completed without error 00% 22 -
# 3 Short offline Completed without error 00% 22 -
# 4 Short offline Completed without error 00% 22 -
# 5 Short offline Completed without error 00% 19 -
# 6 Short offline Completed without error 00% 17 -
# 7 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Don't let slow site performance ruin your business. Deploy New Relic APM
Deploy New Relic app performance management and know exactly
what is happening inside your Ruby, Python, PHP, Java, and .NET app
Try New Relic at no cost today and get our sweet Data Nerd shirt too!
http://p.sf.net/sfu/newrelic-dev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
