K
Thomas Larnsak
smartctl 5.42 2011-10-20 r3458 [i686-linux-2.6.32.9-70ph5.2.3.01.i686] (local 
build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint M5
Device Model:     SAMSUNG HM160HC
Serial Number:    S12TJ1MB828411
LU WWN Device Id: 5 0f0000 0d2828411
Firmware Version: LQ100-10
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Fri Nov 23 12:11:03 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   56) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  56) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   100   100   051    -    0
  3 Spin_Up_Time            POS---   252   252   025    -    2062
  4 Start_Stop_Count        -O--CK   100   100   000    -    4
  5 Reallocated_Sector_Ct   PO--CK   252   252   010    -    0
  7 Seek_Error_Rate         -OSR--   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   252   252   000    -    1
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    3
191 G-Sense_Error_Rate      -O--CK   252   252   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    1
194 Temperature_Celsius     -O---K   139   115   000    -    33 (Min/Max 23/41)
195 Hardware_ECC_Recovered  -O-RC-   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--C-   252   252   000    -    0
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   -O-R--   100   100   000    -    0
201 Soft_Read_Error_Rate    -O--CK   252   252   000    -    0
223 Load_Retry_Count        -O--CK   252   252   000    -    0
225 Load_Cycle_Count        -O--CK   100   100   000    -    65
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    2 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has    2 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
SMART Log at address 0x08 has    1 sectors [Power Conditions log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error log]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
SMART Log at address 0x81 has   16 sectors [Host vendor specific log]
SMART Log at address 0x82 has   16 sectors [Host vendor specific log]
SMART Log at address 0x83 has   16 sectors [Host vendor specific log]
SMART Log at address 0x84 has   16 sectors [Host vendor specific log]
SMART Log at address 0x85 has   16 sectors [Host vendor specific log]
SMART Log at address 0x86 has   16 sectors [Host vendor specific log]
SMART Log at address 0x87 has   16 sectors [Host vendor specific log]
SMART Log at address 0x88 has   16 sectors [Host vendor specific log]
SMART Log at address 0x89 has   16 sectors [Host vendor specific log]
SMART Log at address 0x8a has   16 sectors [Host vendor specific log]
SMART Log at address 0x8b has   16 sectors [Host vendor specific log]
SMART Log at address 0x8c has   16 sectors [Host vendor specific log]
SMART Log at address 0x8d has   16 sectors [Host vendor specific log]
SMART Log at address 0x8e has   16 sectors [Host vendor specific log]
SMART Log at address 0x8f has   16 sectors [Host vendor specific log]
SMART Log at address 0x90 has   16 sectors [Host vendor specific log]
SMART Log at address 0x91 has   16 sectors [Host vendor specific log]
SMART Log at address 0x92 has   16 sectors [Host vendor specific log]
SMART Log at address 0x93 has   16 sectors [Host vendor specific log]
SMART Log at address 0x94 has   16 sectors [Host vendor specific log]
SMART Log at address 0x95 has   16 sectors [Host vendor specific log]
SMART Log at address 0x96 has   16 sectors [Host vendor specific log]
SMART Log at address 0x97 has   16 sectors [Host vendor specific log]
SMART Log at address 0x98 has   16 sectors [Host vendor specific log]
SMART Log at address 0x99 has   16 sectors [Host vendor specific log]
SMART Log at address 0x9a has   16 sectors [Host vendor specific log]
SMART Log at address 0x9b has   16 sectors [Host vendor specific log]
SMART Log at address 0x9c has   16 sectors [Host vendor specific log]
SMART Log at address 0x9d has   16 sectors [Host vendor specific log]
SMART Log at address 0x9e has   16 sectors [Host vendor specific log]
SMART Log at address 0x9f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]

SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Extended offline    Completed without error       00%         1         -
# 2  Short offline       Completed without error       00%         0         -

Note: selective self-test log revision number (0) not 1 implies that no 
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been 
run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    33 Celsius
Power Cycle Min/Max Temperature:     26/38 Celsius
Lifetime    Min/Max Temperature:     26/39 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:     15/55 Celsius
Min/Max Temperature Limit:           10/60 Celsius
Temperature History Size (Index):    128 (71)

Index    Estimated Time   Temperature Celsius
  72    2012-11-23 10:04    39  ********************
 ...    ..(  9 skipped).    ..  ********************
  82    2012-11-23 10:14    39  ********************
  83    2012-11-23 10:15    38  *******************
 ...    ..(  6 skipped).    ..  *******************
  90    2012-11-23 10:22    38  *******************
  91    2012-11-23 10:23     ?  -
  92    2012-11-23 10:24     ?  -
  93    2012-11-23 10:25    28  *********
  94    2012-11-23 10:26     ?  -
  95    2012-11-23 10:27    26  *******
  96    2012-11-23 10:28    26  *******
  97    2012-11-23 10:29    29  **********
  98    2012-11-23 10:30    29  **********
  99    2012-11-23 10:31    30  ***********
 100    2012-11-23 10:32    30  ***********
 101    2012-11-23 10:33    30  ***********
 102    2012-11-23 10:34    31  ************
 103    2012-11-23 10:35    32  *************
 104    2012-11-23 10:36    33  **************
 105    2012-11-23 10:37    33  **************
 106    2012-11-23 10:38    33  **************
 107    2012-11-23 10:39    34  ***************
 108    2012-11-23 10:40    34  ***************
 109    2012-11-23 10:41    34  ***************
 110    2012-11-23 10:42    33  **************
 111    2012-11-23 10:43    34  ***************
 112    2012-11-23 10:44    34  ***************
 113    2012-11-23 10:45    35  ****************
 ...    ..(  2 skipped).    ..  ****************
 116    2012-11-23 10:48    35  ****************
 117    2012-11-23 10:49    34  ***************
 ...    ..(  8 skipped).    ..  ***************
 126    2012-11-23 10:58    34  ***************
 127    2012-11-23 10:59    38  *******************
 ...    ..( 64 skipped).    ..  *******************
  64    2012-11-23 12:04    38  *******************
  65    2012-11-23 12:05    37  ******************
  66    2012-11-23 12:06    37  ******************
  67    2012-11-23 12:07    35  ****************
  68    2012-11-23 12:08    35  ****************
  69    2012-11-23 12:09    34  ***************
  70    2012-11-23 12:10    34  ***************
  71    2012-11-23 12:11    34  ***************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x000a  2            2  Device-to-host register FISes sent due to a COMRESET
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            0  Transition from drive PhyRdy to drive PhyNRdy
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x8001  2            0  Vendor specific
------------------------------------------------------------------------------
Monitor your physical, virtual and cloud infrastructure from a single
web console. Get in-depth insight into apps, servers, databases, vmware,
SAP, cloud infrastructure, etc. Download 30-day Free Trial.
Pricing starts from $795 for 25 servers or applications!
http://p.sf.net/sfu/zoho_dev2dev_nov
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to