Hi,
the minimum temperature is actually is:
Disk_1: -24°C.
194 Temperature_Celsius 0x0022 100 012 000 Old_age Always
- 28 (255 232 0 60 0)
Disk_2: -6°C
194 Temperature_Celsius 0x0022 100 038 000 Old_age Always
- 23 (255 250 0 71 0)
These disks were used in prototypes, meanwhile we use Endurastar but I
didn't have a sample which was exposed to negative temperatures.
regards,
Uli
smartctl 6.0 2012-10-10 r3643 [x86_64-w64-mingw32-win7-sp1] (sf-6.0-1)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Endurastar J4K20/N4K20 (formerly DK23FA-20J)
Device Model: HITACHI_DK23FA-20J
Serial Number: 1GJ631
Firmware Version: 00M7A0A0
User Capacity: 20.003.880.960 bytes [20,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-5 T13/1321D revision 3
Local Time is: Tue Mar 05 10:56:33 2013 MZ
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1420) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 24) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate P-SR-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 23610
3 Spin_Up_Time POS--- 100 100 050 - 0
4 Start_Stop_Count -O--CK 100 100 000 - 317
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 050 - 823
8 Seek_Time_Performance P-S--- 100 100 050 - 1185
9 Power_On_Minutes -O--CK 100 100 000 - 345h+36m
10 Spin_Retry_Count PO--C- 100 100 050 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 317
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 11
192 Power-Off_Retract_Count -O--CK 100 100 000 - 90
193 Load_Cycle_Count -O--CK 100 100 000 - 2953/3044
194 Temperature_Celsius -O---K 100 012 000 - 27 (255 232 0 60 0)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2
200 Multi_Zone_Error_Rate PO--C- 100 100 050 - 0
201 Soft_Read_Error_Rate -O--C- 100 100 000 - 0
223 Load_Retry_Count -O--C- 100 100 000 - 0
230 Head_Amplitude -O--CK 100 100 000 - 2163
231 Temperature_Celsius -O---K 100 014 000 - 281376196329500
250 Read_Error_Retry_Rate -O-R-- 100 090 000 - 813
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not
supported
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
SMART Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
SMART Log at address 0x80 has 16 sectors [Host vendor specific log]
SMART Log at address 0x81 has 16 sectors [Host vendor specific log]
SMART Log at address 0x82 has 16 sectors [Host vendor specific log]
SMART Log at address 0x83 has 16 sectors [Host vendor specific log]
SMART Log at address 0x84 has 16 sectors [Host vendor specific log]
SMART Log at address 0x85 has 16 sectors [Host vendor specific log]
SMART Log at address 0x86 has 16 sectors [Host vendor specific log]
SMART Log at address 0x87 has 16 sectors [Host vendor specific log]
SMART Log at address 0x88 has 16 sectors [Host vendor specific log]
SMART Log at address 0x89 has 16 sectors [Host vendor specific log]
SMART Log at address 0x8a has 16 sectors [Host vendor specific log]
SMART Log at address 0x8b has 16 sectors [Host vendor specific log]
SMART Log at address 0x8c has 16 sectors [Host vendor specific log]
SMART Log at address 0x8d has 16 sectors [Host vendor specific log]
SMART Log at address 0x8e has 16 sectors [Host vendor specific log]
SMART Log at address 0x8f has 16 sectors [Host vendor specific log]
SMART Log at address 0x90 has 16 sectors [Host vendor specific log]
SMART Log at address 0x91 has 16 sectors [Host vendor specific log]
SMART Log at address 0x92 has 16 sectors [Host vendor specific log]
SMART Log at address 0x93 has 16 sectors [Host vendor specific log]
SMART Log at address 0x94 has 16 sectors [Host vendor specific log]
SMART Log at address 0x95 has 16 sectors [Host vendor specific log]
SMART Log at address 0x96 has 16 sectors [Host vendor specific log]
SMART Log at address 0x97 has 16 sectors [Host vendor specific log]
SMART Log at address 0x98 has 16 sectors [Host vendor specific log]
SMART Log at address 0x99 has 16 sectors [Host vendor specific log]
SMART Log at address 0x9a has 16 sectors [Host vendor specific log]
SMART Log at address 0x9b has 16 sectors [Host vendor specific log]
SMART Log at address 0x9c has 16 sectors [Host vendor specific log]
SMART Log at address 0x9d has 16 sectors [Host vendor specific log]
SMART Log at address 0x9e has 16 sectors [Host vendor specific log]
SMART Log at address 0x9f has 16 sectors [Host vendor specific log]
SMART Log at address 0xa0 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa1 has 96 sectors [Device vendor specific log]
SMART Log at address 0xa2 has 96 sectors [Device vendor specific log]
SMART Log at address 0xa3 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa4 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa5 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa6 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa7 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa8 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa9 has 1 sectors [Device vendor specific log]
SMART Log at address 0xaa has 1 sectors [Device vendor specific log]
SMART Log at address 0xab has 1 sectors [Device vendor specific log]
SMART Log at address 0xac has 1 sectors [Device vendor specific log]
SMART Log at address 0xad has 1 sectors [Device vendor specific log]
SMART Log at address 0xae has 1 sectors [Device vendor specific log]
SMART Log at address 0xaf has 1 sectors [Device vendor specific log]
SMART Log at address 0xb0 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb1 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb2 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb3 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb4 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb5 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb6 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb7 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb8 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb9 has 1 sectors [Device vendor specific log]
SMART Log at address 0xba has 1 sectors [Device vendor specific log]
SMART Log at address 0xbb has 1 sectors [Device vendor specific log]
SMART Log at address 0xbc has 1 sectors [Device vendor specific log]
SMART Log at address 0xbd has 1 sectors [Device vendor specific log]
SMART Log at address 0xbe has 1 sectors [Device vendor specific log]
SMART Log at address 0xbf has 1 sectors [Device vendor specific log]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 37 hours (1 days + 13 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 01 00 00 00 e0 00 00:02:33.680 READ DMA
c8 ff 01 00 00 00 e0 00 00:02:33.570 READ DMA
c8 ff 01 00 00 00 e0 00 00:02:33.480 READ DMA
c8 ff 01 00 00 00 e0 00 00:02:32.960 READ DMA
f5 ff 18 03 00 00 e0 00 00:02:32.850 SECURITY FREEZE LOCK
Error 3 occurred at disk power-on lifetime: 37 hours (1 days + 13 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 01 00 00 00 e0 00 00:02:33.480 READ DMA
c8 ff 01 00 00 00 e0 00 00:02:32.960 READ DMA
f5 ff 18 03 00 00 e0 00 00:02:32.850 SECURITY FREEZE LOCK
b0 da 00 ff 4f c2 e0 00 00:00:37.410 SMART RETURN STATUS
e3 03 00 ff 4f c2 e0 02 00:00:35.090 IDLE
Error 2 occurred at disk power-on lifetime: 3 hours (0 days + 3 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 8a 48 5e e0 Error: UNC 5 sectors at LBA = 0x005e488a = 6178954
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 87 48 5e e0 00 00:01:27.080 READ DMA
c8 d8 08 87 48 5e e0 00 00:01:24.870 READ DMA
c8 d8 08 7f 48 5e e0 00 00:01:24.870 READ DMA
c8 d8 08 77 48 5e e0 00 00:01:24.870 READ DMA
c8 d8 08 6f 48 5e e0 00 00:01:24.870 READ DMA
Error 1 occurred at disk power-on lifetime: 3 hours (0 days + 3 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 8a 48 5e e0 Error: UNC 5 sectors at LBA = 0x005e488a = 6178954
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 87 48 5e e0 00 00:01:24.870 READ DMA
c8 d8 08 7f 48 5e e0 00 00:01:24.870 READ DMA
c8 d8 08 77 48 5e e0 00 00:01:24.870 READ DMA
c8 d8 08 6f 48 5e e0 00 00:01:24.870 READ DMA
c8 d8 08 67 48 5e e0 00 00:01:24.870 READ DMA
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 345 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11) not supported
smartctl 6.0 2012-10-10 r3643 [x86_64-w64-mingw32-win7-sp1] (sf-6.0-1)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Endurastar J4K20/N4K20 (formerly DK23FA-20J)
Device Model: HITACHI_DK23FA-20J
Serial Number: 1GJ644
Firmware Version: 00M7A0A0
User Capacity: 20.003.880.960 bytes [20,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-5 T13/1321D revision 3
Local Time is: Tue Mar 05 11:09:41 2013 MZ
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1420) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 24) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate P-SR-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 23790
3 Spin_Up_Time POS--- 100 100 050 - 0
4 Start_Stop_Count -O--CK 100 100 000 - 740
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 050 - 551
8 Seek_Time_Performance P-S--- 100 100 050 - 1186
9 Power_On_Minutes -O--CK 093 093 000 - 3943h+04m
10 Spin_Retry_Count PO--C- 100 100 050 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 739
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 3
192 Power-Off_Retract_Count -O--CK 100 100 000 - 123
193 Load_Cycle_Count -O--CK 072 072 000 - 173052/173176
194 Temperature_Celsius -O---K 100 038 000 - 26 (255 250 0 71 0)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 149
200 Multi_Zone_Error_Rate PO--C- 100 100 050 - 0
201 Soft_Read_Error_Rate -O--C- 100 100 000 - 0
223 Load_Retry_Count -O--C- 100 100 000 - 0
230 Head_Amplitude -O--CK 100 100 000 - 25222
231 Temperature_Celsius -O---K 100 040 000 - 281449211494427
250 Read_Error_Retry_Rate -O-R-- 100 100 000 - 139
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not
supported
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
SMART Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
SMART Log at address 0x80 has 16 sectors [Host vendor specific log]
SMART Log at address 0x81 has 16 sectors [Host vendor specific log]
SMART Log at address 0x82 has 16 sectors [Host vendor specific log]
SMART Log at address 0x83 has 16 sectors [Host vendor specific log]
SMART Log at address 0x84 has 16 sectors [Host vendor specific log]
SMART Log at address 0x85 has 16 sectors [Host vendor specific log]
SMART Log at address 0x86 has 16 sectors [Host vendor specific log]
SMART Log at address 0x87 has 16 sectors [Host vendor specific log]
SMART Log at address 0x88 has 16 sectors [Host vendor specific log]
SMART Log at address 0x89 has 16 sectors [Host vendor specific log]
SMART Log at address 0x8a has 16 sectors [Host vendor specific log]
SMART Log at address 0x8b has 16 sectors [Host vendor specific log]
SMART Log at address 0x8c has 16 sectors [Host vendor specific log]
SMART Log at address 0x8d has 16 sectors [Host vendor specific log]
SMART Log at address 0x8e has 16 sectors [Host vendor specific log]
SMART Log at address 0x8f has 16 sectors [Host vendor specific log]
SMART Log at address 0x90 has 16 sectors [Host vendor specific log]
SMART Log at address 0x91 has 16 sectors [Host vendor specific log]
SMART Log at address 0x92 has 16 sectors [Host vendor specific log]
SMART Log at address 0x93 has 16 sectors [Host vendor specific log]
SMART Log at address 0x94 has 16 sectors [Host vendor specific log]
SMART Log at address 0x95 has 16 sectors [Host vendor specific log]
SMART Log at address 0x96 has 16 sectors [Host vendor specific log]
SMART Log at address 0x97 has 16 sectors [Host vendor specific log]
SMART Log at address 0x98 has 16 sectors [Host vendor specific log]
SMART Log at address 0x99 has 16 sectors [Host vendor specific log]
SMART Log at address 0x9a has 16 sectors [Host vendor specific log]
SMART Log at address 0x9b has 16 sectors [Host vendor specific log]
SMART Log at address 0x9c has 16 sectors [Host vendor specific log]
SMART Log at address 0x9d has 16 sectors [Host vendor specific log]
SMART Log at address 0x9e has 16 sectors [Host vendor specific log]
SMART Log at address 0x9f has 16 sectors [Host vendor specific log]
SMART Log at address 0xa0 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa1 has 96 sectors [Device vendor specific log]
SMART Log at address 0xa2 has 96 sectors [Device vendor specific log]
SMART Log at address 0xa3 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa4 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa5 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa6 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa7 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa8 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa9 has 1 sectors [Device vendor specific log]
SMART Log at address 0xaa has 1 sectors [Device vendor specific log]
SMART Log at address 0xab has 1 sectors [Device vendor specific log]
SMART Log at address 0xac has 1 sectors [Device vendor specific log]
SMART Log at address 0xad has 1 sectors [Device vendor specific log]
SMART Log at address 0xae has 1 sectors [Device vendor specific log]
SMART Log at address 0xaf has 1 sectors [Device vendor specific log]
SMART Log at address 0xb0 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb1 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb2 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb3 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb4 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb5 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb6 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb7 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb8 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb9 has 1 sectors [Device vendor specific log]
SMART Log at address 0xba has 1 sectors [Device vendor specific log]
SMART Log at address 0xbb has 1 sectors [Device vendor specific log]
SMART Log at address 0xbc has 1 sectors [Device vendor specific log]
SMART Log at address 0xbd has 1 sectors [Device vendor specific log]
SMART Log at address 0xbe has 1 sectors [Device vendor specific log]
SMART Log at address 0xbf has 1 sectors [Device vendor specific log]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 168 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 168 occurred at disk power-on lifetime: 3855 hours (160 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 b0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 01 01 00 00 b0 00 00:01:10.110 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.990 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.860 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.730 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.600 READ DMA
Error 167 occurred at disk power-on lifetime: 3855 hours (160 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 b0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 01 01 00 00 b0 00 00:01:09.990 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.860 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.730 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.600 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.470 READ DMA
Error 166 occurred at disk power-on lifetime: 3855 hours (160 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 b0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 01 01 00 00 b0 00 00:01:09.860 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.730 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.600 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.470 READ DMA
ef 03 40 01 55 aa b0 00 00:01:09.460 SET FEATURES [Set transfer mode]
Error 165 occurred at disk power-on lifetime: 3855 hours (160 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 b0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 01 01 00 00 b0 00 00:01:09.730 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.600 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.470 READ DMA
ef 03 40 01 55 aa b0 00 00:01:09.460 SET FEATURES [Set transfer mode]
ef 03 0c 01 55 aa b0 00 00:01:09.460 SET FEATURES [Set transfer mode]
Error 164 occurred at disk power-on lifetime: 3855 hours (160 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 01 00 00 b0 Error: ICRC, ABRT at LBA = 0x00000001 = 1
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 01 01 00 00 b0 00 00:01:09.600 READ DMA
c8 03 01 01 00 00 b0 00 00:01:09.470 READ DMA
ef 03 40 01 55 aa b0 00 00:01:09.460 SET FEATURES [Set transfer mode]
ef 03 0c 01 55 aa b0 00 00:01:09.460 SET FEATURES [Set transfer mode]
c6 00 10 01 55 aa b0 00 00:01:09.460 SET MULTIPLE MODE
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 3943 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11) not supported
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
