Please find attached a submission for the disk SanDisk SSD i100 8GB
smartctl 6.1 2013-03-16 r3800 [x86_64-w64-mingw32-win8] (sf-6.1-1)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SanDisk SSD i100 8GB
Serial Number: 124600136030
LU WWN Device Id: 5 001b44 80e542d5e
Firmware Version: 11.56.04
User Capacity: 8,012,390,400 bytes [8.01 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jun 19 21:57:10 2013 GMTST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always
- 0
9 Power_On_Hours 0x0002 100 100 000 Old_age Always
- 2
12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always
- 17
171 Unknown_Attribute 0x0002 100 100 000 Old_age Always
- 0
172 Unknown_Attribute 0x0002 100 100 000 Old_age Always
- 0
173 Unknown_Attribute 0x0002 100 100 000 Old_age Always
- 10
174 Unknown_Attribute 0x0002 100 100 000 Old_age Always
- 9
187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always
- 0
230 Unknown_SSD_Attribute 0x0002 100 100 000 Old_age Always
- 33
232 Available_Reservd_Space 0x0003 100 100 005 Pre-fail Always
- 0
234 Unknown_Attribute 0x0002 100 100 000 Old_age Always
- 21
241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always
- 65849865
242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always
- 30990523
SMART Error Log Version: 1
No Errors Logged
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 2 -
# 2 Short offline Aborted by host 90% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
