-- 
Vorstandsvorsitzender/Chairman of the board of management:
Gerd-Lothar Leonhart
Vorstand/Board of Management:
Dr. Bernd Finkbeiner, Michael Heinrichs, 
Dr. Arno Steitz, Dr. Ingrid Zech
Vorsitzender des Aufsichtsrats/
Chairman of the Supervisory Board:
Philippe Miltin
Sitz/Registered Office: Tuebingen
Registergericht/Registration Court: Stuttgart
Registernummer/Commercial Register No.: HRB 382196
smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.1.10-1.16-default] (SUSE RPM)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     TS128GSSD630
Serial Number:    20130225A65111581991
Firmware Version: 20121120
User Capacity:    128,043,712,512 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ACS-2 (revision not indicated)
Local Time is:    Wed Jun 26 08:01:01 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Total time to complete Offline 
data collection:                (    1) seconds.
Offline data collection
capabilities:                    (0x00)         Offline data collection not 
supported.
SMART capabilities:            (0x0002) Does not save SMART data before
                                        entering power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x00) Error logging NOT supported.
                                        General Purpose Logging supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     ------   100   100   000    -    0
  5 Reallocated_Sector_Ct   ------   100   100   000    -    0
  9 Power_On_Hours          ------   100   100   000    -    1001
192 Power-Off_Retract_Count ------   100   100   000    -    0
194 Temperature_Celsius     ------   100   100   000    -    27
195 Hardware_ECC_Recovered  ------   100   100   000    -    0
196 Reallocated_Event_Count ------   100   100   016    -    0
198 Offline_Uncorrectable   ------   100   100   050    -    0
199 UDMA_CRC_Error_Count    ------   100   100   050    -    0
 12 Power_Cycle_Count       ------   100   100   000    -    10
241 Total_LBAs_Written      ------   100   100   000    -    13090
242 Total_LBAs_Read         ------   100   100   000    -    10853
160 Unknown_Attribute       ------   100   100   000    -    0
161 Unknown_Attribute       ------   100   100   000    -    235
163 Unknown_Attribute       ------   100   100   000    -    15
164 Unknown_Attribute       ------   100   100   000    -    19050
165 Unknown_Attribute       ------   100   100   050    -    9
166 Unknown_Attribute       ------   100   100   050    -    0
167 Unknown_Attribute       ------   100   100   100    NOW  4
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

Read SMART Log Directory failed.

General Purpose Log Directory Version 1
GP Log at address 0x00 has    1 sectors [Log Directory]
GP Log at address 0x10 has    1 sectors [NCQ Command Error log]

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
Error SMART Error Self-Test Log Read failed: scsi error aborted command
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging
Warning: device does not support SCT Commands
SATA Phy Event Counters (GP Log 0x11) not supported
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:

Build for Windows Store.

http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to