smartctl -a attached, additionally you can find some info on the attributes
here:
<http://www.micron.com/~/media/Documents/Products/Technical Note/Solid
State Storage/tnfd21_m500-mu02_smart_attributes.pdf>
e.g. attribute 202 = life left etc.
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.1-RELEASE amd64] (local
build)Copyright (C) 2002-13, Bruce Allen, Christian Franke,
www.smartmontools.org=== START OF INFORMATION SECTION ===Device Model:
Crucial_CT120M500SSD1Serial Number: xxxxxxxxxxxxxLU WWN Device Id: 5 00a075
1093a348bFirmware Version: MU02User Capacity: 120,034,123,776 bytes [120
GB]Sector Sizes: 512 bytes logical, 4096 bytes physicalRotation Rate:
Solid State DeviceDevice is: Not in smartctl database [for details use:
-P showall]ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6SATA Version
is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)Local Time is: Fri Aug 16
12:48:49 2013 UTCSMART support is: Available - device has SMART
capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION
===SMART overall-health self-assessment test result: PASSEDGeneral SMART
Values:Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command
from host. Auto Offline Data Collection:
Enabled.Self-test execution status: ( 0) The previous self-test routine
completed without error or no self-test
has ever been run.Total time to
complete Offline data collection: ( 140) seconds.Offline data
collectioncapabilities: (0x7b) SMART execute Offline
immediate. Auto Offline data collection
on/off support. Suspend Offline
collection upon new command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.SMART capabilities: (0x0003) Saves
SMART data before entering power-saving
mode. Supports SMART auto save
timer.Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.Short self-test
routine recommended polling time: ( 2) minutes.Extended self-test
routinerecommended polling time: ( 9) minutes.Conveyance self-test
routinerecommended polling time: ( 3) minutes.SCT capabilities:
(0x0035) SCT Status supported. SCT
Feature Control supported. SCT Data
Table supported.SMART Attributes Data Structure revision number: 16Vendor
Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG
VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1
Raw_Read_Error_Rate 0x0032 100 100 --- Old_age Always -
225 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always
- 49152 9 Power_On_Hours 0x0032 100 100 ---
Old_age Always - 4 12 Power_Cycle_Count 0x0032 100 100
--- Old_age Always - 3170 Unknown_Attribute 0x0032
100 100 --- Old_age Always - 19171 Unknown_Attribute
0x0032 100 100 --- Old_age Always - 0172
Unknown_Attribute 0x0032 100 100 --- Old_age Always -
0173 Unknown_Attribute 0x0032 100 100 --- Old_age Always
- 2174 Unknown_Attribute 0x0032 100 100 --- Old_age
Always - 1181 Program_Fail_Cnt_Total 0x0022 100 100 ---
Old_age Always - 292060004386183 Runtime_Bad_Block 0x0032
100 100 --- Old_age Always - 0184 End-to-End_Error
0x0032 100 100 --- Old_age Always - 0187
Reported_Uncorrect 0x0032 100 100 --- Old_age Always -
0188 Command_Timeout 0x0032 100 100 --- Old_age Always
- 1194 Temperature_Celsius 0x0022 072 059 --- Old_age
Always - 28 (Min/Max 26/41)195 Hardware_ECC_Recovered 0x003a 100
100 --- Old_age Always - 1199625888196
Reallocated_Event_Count 0x0032 100 100 --- Old_age Always -
19197 Current_Pending_Sector 0x0032 100 100 --- Old_age Always
- 0198 Offline_Uncorrectable 0x0030 100 100 --- Old_age
Offline - 0199 UDMA_CRC_Error_Count 0x0032 100 100 ---
Old_age Always - 0202 Unknown_SSD_Attribute 0x0031 100 100
--- Pre-fail Offline - 0206 Unknown_SSD_Attribute 0x000e
100 100 --- Old_age Always - 0SMART Error Log Version: 1No
Errors LoggedSMART Self-test log structure revision number 1Num
Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error# 1 Vendor (0xff) Completed without error 00%
3 -SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing
2 0 0 Not_testing 3 0 0 Not_testing 4
0 0 Not_testing 5 0 0 Not_testingSelective
self-test flags (0x0): After scanning selected spans, do NOT read-scan
remainder of disk.If Selective self-test is pending on power-up, resume after 0
minute delay.------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
