Output is attached. Thank you.
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.0] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: CT250BX100SSD1
Serial Number: xxxxxxxxxxxx
LU WWN Device Id: x xxxxxx xxxxxxxxx
Firmware Version: MU02
User Capacity: 250'059'350'016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Jun 28 15:43:49 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) XXX Error Recovery Control Command failed: scsi error badly
formed scsi parameters
Wt Cache Reorder: N/A
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
9 Power_On_Hours ------ 100 100 000 - 16
12 Power_Cycle_Count ------ 100 100 000 - 80
160 Unknown_Attribute ------ 100 100 000 - 0
161 Unknown_Attribute ------ 100 100 000 - 72
163 Unknown_Attribute ------ 100 100 000 - 19
164 Unknown_Attribute ------ 100 100 000 - 1210
165 Unknown_Attribute ------ 100 100 000 - 3
166 Unknown_Attribute ------ 100 100 000 - 1
167 Unknown_Attribute ------ 100 100 000 - 1
168 Unknown_Attribute ------ 100 100 000 - 2000
169 Unknown_Attribute ------ 100 100 000 - 100
175 Program_Fail_Count_Chip ------ 100 100 000 - 0
176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
177 Wear_Leveling_Count ------ 100 100 000 - 0
178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
192 Power-Off_Retract_Count ------ 100 100 000 - 0
194 Temperature_Celsius ------ 100 100 000 - 36
195 Hardware_ECC_Recovered ------ 100 100 000 - 32
196 Reallocated_Event_Count ------ 100 100 000 - 0
197 Current_Pending_Sector ------ 100 100 000 - 0
198 Offline_Uncorrectable ------ 100 100 000 - 0
199 UDMA_CRC_Error_Count ------ 100 100 000 - 0
232 Available_Reservd_Space ------ 100 100 000 - 100
241 Total_LBAs_Written ------ 100 100 000 - 2939
242 Total_LBAs_Read ------ 100 100 000 - 1617
245 Unknown_Attribute ------ 100 100 000 - 9680
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters
0x24 GPL R/O 64 Current Device Internal Status Data log
0x25 GPL R/O 64 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 16 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Min/Max Temperature: 35/37 Celsius
Lifetime Min/Max Temperature: 0/42 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: 0/100 Celsius
Temperature History Size (Index): 128 (46)
Index Estimated Time Temperature Celsius
47 2015-06-28 13:36 36 *****************
48 2015-06-28 13:37 34 ***************
... ..( 4 skipped). .. ***************
53 2015-06-28 13:42 34 ***************
54 2015-06-28 13:43 35 ****************
55 2015-06-28 13:44 35 ****************
56 2015-06-28 13:45 34 ***************
57 2015-06-28 13:46 34 ***************
58 2015-06-28 13:47 33 **************
59 2015-06-28 13:48 31 ************
60 2015-06-28 13:49 32 *************
61 2015-06-28 13:50 32 *************
62 2015-06-28 13:51 32 *************
63 2015-06-28 13:52 33 **************
... ..( 2 skipped). .. **************
66 2015-06-28 13:55 33 **************
67 2015-06-28 13:56 34 ***************
68 2015-06-28 13:57 34 ***************
69 2015-06-28 13:58 34 ***************
70 2015-06-28 13:59 30 ***********
71 2015-06-28 14:00 30 ***********
72 2015-06-28 14:01 31 ************
73 2015-06-28 14:02 31 ************
74 2015-06-28 14:03 36 *****************
75 2015-06-28 14:04 36 *****************
76 2015-06-28 14:05 38 *******************
77 2015-06-28 14:06 38 *******************
78 2015-06-28 14:07 37 ******************
79 2015-06-28 14:08 37 ******************
80 2015-06-28 14:09 34 ***************
81 2015-06-28 14:10 34 ***************
82 2015-06-28 14:11 31 ************
... ..( 4 skipped). .. ************
87 2015-06-28 14:16 31 ************
88 2015-06-28 14:17 30 ***********
89 2015-06-28 14:18 29 **********
... ..( 2 skipped). .. **********
92 2015-06-28 14:21 29 **********
93 2015-06-28 14:22 30 ***********
94 2015-06-28 14:23 30 ***********
95 2015-06-28 14:24 31 ************
96 2015-06-28 14:25 31 ************
97 2015-06-28 14:26 33 **************
98 2015-06-28 14:27 33 **************
99 2015-06-28 14:28 34 ***************
... ..( 4 skipped). .. ***************
104 2015-06-28 14:33 34 ***************
105 2015-06-28 14:34 33 **************
106 2015-06-28 14:35 33 **************
107 2015-06-28 14:36 31 ************
108 2015-06-28 14:37 31 ************
109 2015-06-28 14:38 31 ************
110 2015-06-28 14:39 21 **
... ..( 2 skipped). .. **
113 2015-06-28 14:42 21 **
114 2015-06-28 14:43 22 ***
115 2015-06-28 14:44 22 ***
116 2015-06-28 14:45 30 ***********
117 2015-06-28 14:46 30 ***********
118 2015-06-28 14:47 34 ***************
119 2015-06-28 14:48 34 ***************
120 2015-06-28 14:49 36 *****************
121 2015-06-28 14:50 36 *****************
122 2015-06-28 14:51 37 ******************
123 2015-06-28 14:52 37 ******************
124 2015-06-28 14:53 38 *******************
125 2015-06-28 14:54 38 *******************
126 2015-06-28 14:55 38 *******************
127 2015-06-28 14:56 37 ******************
0 2015-06-28 14:57 37 ******************
1 2015-06-28 14:58 37 ******************
2 2015-06-28 14:59 31 ************
3 2015-06-28 15:00 31 ************
4 2015-06-28 15:01 33 **************
5 2015-06-28 15:02 33 **************
6 2015-06-28 15:03 34 ***************
7 2015-06-28 15:04 34 ***************
8 2015-06-28 15:05 34 ***************
9 2015-06-28 15:06 33 **************
... ..( 2 skipped). .. **************
12 2015-06-28 15:09 33 **************
13 2015-06-28 15:10 34 ***************
14 2015-06-28 15:11 34 ***************
15 2015-06-28 15:12 35 ****************
16 2015-06-28 15:13 34 ***************
... ..( 2 skipped). .. ***************
19 2015-06-28 15:16 34 ***************
20 2015-06-28 15:17 35 ****************
21 2015-06-28 15:18 35 ****************
22 2015-06-28 15:19 36 *****************
... ..( 3 skipped). .. *****************
26 2015-06-28 15:23 36 *****************
27 2015-06-28 15:24 35 ****************
... ..( 10 skipped). .. ****************
38 2015-06-28 15:35 35 ****************
39 2015-06-28 15:36 37 ******************
40 2015-06-28 15:37 36 *****************
... ..( 5 skipped). .. *****************
46 2015-06-28 15:43 36 *****************
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 80 Lifetime Power-On Resets
1 0x010 4 16 Power-on Hours
1 0x018 6 192639582 Logical Sectors Written
1 0x020 6 1786126 Number of Write Commands
1 0x028 6 106029374 Logical Sectors Read
1 0x030 6 1930352 Number of Read Commands
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 0 Resets Between Cmd Acceptance and Completion
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 278 Number of Hardware Resets
6 0x018 4 0 Number of Interface CRC Errors
7 ===== = = == Solid State Device Statistics (rev 1) ==
7 0x008 1 0 Percentage Used Endurance Indicator
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/
_______________________________________________ Smartmontools-database mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/smartmontools-database
