Hi,
please find a smartctl file attached describing a device not already
present in smartctl database.
it is a Sandisk SSD, model SD8SNAT128G1002, found in an ASUS GL752VW gaming
notebook.
greetings
A.Dellieux
smartctl 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-win8] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SanDisk SD8SNAT128G1002
Firmware Version: Z2317002
User Capacity: 128 035 676 160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: M.2
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Nov 20 14:55:05 2016 PM
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
9 Power_On_Hours -O--CK 011 100 000 - 11
12 Power_Cycle_Count -O--CK 100 100 000 - 572
166 Unknown_Attribute -O--CK 100 100 000 - 3
167 Unknown_Attribute -O--CK 100 100 000 - 0
168 Unknown_Attribute -O--CK 100 100 000 - 44
169 Unknown_Attribute -O--CK 100 100 000 - 116
170 Unknown_Attribute -O--CK 100 100 000 - 0
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
173 Unknown_Attribute -O--CK 100 100 --- - 20
174 Unknown_Attribute -O--CK 100 100 000 - 235
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 072 100 000 - 28 (Min/Max 0/45)
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 19
230 Unknown_SSD_Attribute -O--CK 100 100 000 - 77
232 Available_Reservd_Space PO--CK 100 100 004 - 100
233 Media_Wearout_Indicator -O--CK 100 100 000 - 1459
241 Total_LBAs_Written ----CK 253 253 000 - 583
242 Total_LBAs_Read ----CK 253 253 000 - 714
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART
checksum.
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 173 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 173 [2] occurred at disk power-on lifetime: 65535 hours (2730 days + 15
hours)
When the command that caused the error occurred, the device was in a vendor
specific state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
ff -- ff ff ff ff ff ff ff ff ff ff ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
Error 172 [1] occurred at disk power-on lifetime: 65535 hours (2730 days + 15
hours)
When the command that caused the error occurred, the device was in a vendor
specific state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
ff -- ff ff ff ff ff ff ff ff ff ff ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
Error 171 [0] occurred at disk power-on lifetime: 65535 hours (2730 days + 15
hours)
When the command that caused the error occurred, the device was in a vendor
specific state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
ff -- ff ff ff ff ff ff ff ff ff ff ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
ff ff ff ff ff ff ff ff ff ff ff ff ff 49d+17:02:47.295 [VENDOR SPECIFIC]
Error 170 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d1 01 01 00 00 4f 00 c2 01 00 00 00:00:00.000 SMART READ ATTRIBUTE
THRESHOLDS [OBS-4]
2f 00 00 01 01 00 00 00 00 00 03 00 00 00:00:00.000 READ LOG EXT
2f 00 00 01 01 00 00 00 00 00 00 00 00 00:00:00.000 READ LOG EXT
b0 00 d5 01 01 00 00 4f 00 c2 00 00 00 00:00:00.000 SMART READ LOG
b0 00 da 00 00 00 00 4f 00 c2 00 00 00 00:00:00.000 SMART RETURN STATUS
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 11 -
# 2 Short offline Completed without error 00% 11 -
# 3 Short offline Completed without error 00% 11 -
# 4 Extended offline Completed without error 00% 11 -
# 5 Short offline Completed without error 00% 11 -
# 6 Short offline Completed without error 00% 11 -
# 7 Short offline Completed without error 00% 11 -
# 8 Short offline Completed without error 00% 11 -
# 9 Short offline Completed without error 00% 11 -
#10 Short offline Completed without error 00% 11 -
#11 Short offline Completed without error 00% 11 -
#12 Extended offline Completed without error 00% 11 -
#13 Short offline Completed without error 00% 10 -
#14 Short offline Completed without error 00% 10 -
#15 Short offline Completed without error 00% 10 -
#16 Short offline Completed without error 00% 10 -
#17 Short offline Completed without error 00% 10 -
#18 Short offline Interrupted (host reset) 40% 10 -
#19 Extended offline Completed without error 00% 10 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 572 --- Lifetime Power-On Resets
0x01 0x018 6 0 --- Logical Sectors Written
0x01 0x020 6 0 --- Number of Write Commands
0x01 0x028 6 0 --- Logical Sectors Read
0x01 0x030 6 0 --- Number of Read Commands
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
