Hi,

attached is the smartctl -x output for the Micron 5100 Series SSD.

The supported SMART attributes can be found at:

https://www.micron.com/~/media/documents/products/data-sheet/ssd/5100_ssd.pdf

All the best, Georg

smartctl -x /dev/sdh
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-43-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Micron_5100_MTFDDAK960TBY
Serial Number:    1702157D354F
LU WWN Device Id: 5 00a075 1157d354f
Firmware Version: D0MU000
User Capacity:    960,197,124,096 bytes [960 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 (unknown minor revision code: 0x006d)
SATA Version is:  SATA >3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Wed Jul 19 08:00:29 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x04) Offline data collection activity
                                        was suspended by an interrupting 
command from host.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                ( 1794) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (   8) minutes.
Conveyance self-test routine
recommended polling time:        (   3) minutes.
SCT capabilities:              (0x0035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   050    -    0
  5 Reallocated_Sector_Ct   -O--CK   100   100   001    -    0
  9 Power_On_Hours          -O--CK   100   100   001    -    208
 12 Power_Cycle_Count       -O--CK   100   100   001    -    1
170 Unknown_Attribute       PO--CK   100   100   010    -    0
171 Unknown_Attribute       -O--CK   100   100   000    -    0
172 Unknown_Attribute       -O--CK   100   100   001    -    0
173 Unknown_Attribute       -O--CK   100   100   000    -    6
174 Unknown_Attribute       -O--CK   100   100   000    -    0
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   000    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
188 Command_Timeout         -O--CK   100   100   000    -    0
194 Temperature_Celsius     -O---K   080   071   000    -    20 (Min/Max 19/29)
195 Hardware_ECC_Recovered  -O--CK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   100   100   000    -    0
197 Current_Pending_Sector  -O--CK   100   100   000    -    0
198 Offline_Uncorrectable   ----CK   100   100   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   100   100   000    -    0
202 Unknown_SSD_Attribute   ----CK   100   100   001    -    0
206 Unknown_SSD_Attribute   -OSR--   100   100   000    -    0
246 Unknown_Attribute       -O--CK   100   100   000    -    5563338736
247 Unknown_Attribute       -O--CK   100   100   000    -    173846204
248 Unknown_Attribute       -O--CK   100   100   000    -    276404506
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK   000   000   000    -    7666
210 Unknown_Attribute       -O--CK   100   100   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O     51  Comprehensive SMART error log
0x03       GPL     R/O  16383  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x13       GPL     R/O      1  SATA NCQ Send and Receive log
0x24       GPL     R/O   8000  Current Device Internal Status Data log
0x25       GPL     R/O   8000  Saved Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0       GPL     VS   35328  Device vendor specific log
0xa1       GPL,SL  VS       3  Device vendor specific log
0xa2       GPL,SL  VS       1  Device vendor specific log
0xa3       GPL     VS   13824  Device vendor specific log
0xa4       GPL     VS     354  Device vendor specific log
0xa4       SL      VS      98  Device vendor specific log
0xa5       GPL     VS    8000  Device vendor specific log
0xa5       SL      VS      64  Device vendor specific log
0xa6       GPL     VS    8000  Device vendor specific log
0xa6       SL      VS      64  Device vendor specific log
0xa7-0xba  GPL,SL  VS       1  Device vendor specific log
0xbc-0xdf  GPL,SL  VS       1  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log size 16383 not supported

SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Vendor (0xff)       Completed without error       00%        48         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       1 (0x0001)
SCT Support Level:                   0
Device State:                        SMART Off-line Data Collection executing 
in background (4)
Current Temperature:                    20 Celsius
Power Cycle Min/Max Temperature:     19/25 Celsius
Lifetime    Min/Max Temperature:     19/29 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/70 Celsius
Min/Max Temperature Limit:           -5/75 Celsius
Temperature History Size (Index):    478 (229)

Index    Estimated Time   Temperature Celsius
 230    2017-07-19 00:03    21  **
 ...    ..( 23 skipped).    ..  **
 254    2017-07-19 00:27    21  **
 255    2017-07-19 00:28    22  ***
 256    2017-07-19 00:29    21  **
 ...    ..( 18 skipped).    ..  **
 275    2017-07-19 00:48    21  **
 276    2017-07-19 00:49    20  *
 277    2017-07-19 00:50    20  *
 278    2017-07-19 00:51    20  *
 279    2017-07-19 00:52    21  **
 280    2017-07-19 00:53    20  *
 ...    ..( 24 skipped).    ..  *
 305    2017-07-19 01:18    20  *
 306    2017-07-19 01:19    21  **
 307    2017-07-19 01:20    20  *
 ...    ..(  5 skipped).    ..  *
 313    2017-07-19 01:26    20  *
 314    2017-07-19 01:27    21  **
 315    2017-07-19 01:28    21  **
 316    2017-07-19 01:29    20  *
 ...    ..(  5 skipped).    ..  *
 322    2017-07-19 01:35    20  *
 323    2017-07-19 01:36    21  **
 324    2017-07-19 01:37    21  **
 325    2017-07-19 01:38    21  **
 326    2017-07-19 01:39    22  ***
 327    2017-07-19 01:40    21  **
 328    2017-07-19 01:41    21  **
 329    2017-07-19 01:42    21  **
 330    2017-07-19 01:43    22  ***
 ...    ..(  2 skipped).    ..  ***
 333    2017-07-19 01:46    22  ***
 334    2017-07-19 01:47    21  **
 ...    ..(  9 skipped).    ..  **
 344    2017-07-19 01:57    21  **
 345    2017-07-19 01:58    20  *
 ...    ..( 10 skipped).    ..  *
 356    2017-07-19 02:09    20  *
 357    2017-07-19 02:10    21  **
 358    2017-07-19 02:11    20  *
 359    2017-07-19 02:12    21  **
 360    2017-07-19 02:13    20  *
 361    2017-07-19 02:14    21  **
 362    2017-07-19 02:15    20  *
 ...    ..( 19 skipped).    ..  *
 382    2017-07-19 02:35    20  *
 383    2017-07-19 02:36    21  **
 384    2017-07-19 02:37    21  **
 385    2017-07-19 02:38    21  **
 386    2017-07-19 02:39    22  ***
 ...    ..(  9 skipped).    ..  ***
 396    2017-07-19 02:49    22  ***
 397    2017-07-19 02:50    21  **
 ...    ..(  3 skipped).    ..  **
 401    2017-07-19 02:54    21  **
 402    2017-07-19 02:55    20  *
 ...    ..( 16 skipped).    ..  *
 419    2017-07-19 03:12    20  *
 420    2017-07-19 03:13    21  **
 421    2017-07-19 03:14    20  *
 ...    ..( 17 skipped).    ..  *
 439    2017-07-19 03:32    20  *
 440    2017-07-19 03:33    21  **
 441    2017-07-19 03:34    21  **
 442    2017-07-19 03:35    22  ***
 ...    ..(  6 skipped).    ..  ***
 449    2017-07-19 03:42    22  ***
 450    2017-07-19 03:43    21  **
 ...    ..( 12 skipped).    ..  **
 463    2017-07-19 03:56    21  **
 464    2017-07-19 03:57    20  *
 ...    ..( 12 skipped).    ..  *
 477    2017-07-19 04:10    20  *
   0    2017-07-19 04:11    21  **
 ...    ..( 53 skipped).    ..  **
  54    2017-07-19 05:05    21  **
  55    2017-07-19 05:06    22  ***
  56    2017-07-19 05:07    21  **
 ...    ..(172 skipped).    ..  **
 229    2017-07-19 08:00    21  **

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04)
Page Offset Size         Value  Description
  1  =====  =                =  == General Statistics (rev 1) ==
  1  0x008  4                1  Lifetime Power-On Resets
  1  0x010  4              208  Power-on Hours
  1  0x018  6       5563338816  Logical Sectors Written
  1  0x020  6         37788813  Number of Write Commands
  1  0x028  6       2695421012  Logical Sectors Read
  1  0x030  6         14893066  Number of Read Commands
  1  0x038  6        749400000  Date and Time TimeStamp
  4  =====  =                =  == General Errors Statistics (rev 1) ==
  4  0x008  4                0  Number of Reported Uncorrectable Errors
  4  0x010  4                0  Resets Between Cmd Acceptance and Completion
  5  =====  =                =  == Temperature Statistics (rev 1) ==
  5  0x008  1               20  Current Temperature
  5  0x010  1               21  Average Short Term Temperature
  5  0x018  1                -  Average Long Term Temperature
  5  0x020  1               29  Highest Temperature
  5  0x028  1               19  Lowest Temperature
  5  0x030  1               21  Highest Average Short Term Temperature
  5  0x038  1               21  Lowest Average Short Term Temperature
  5  0x040  1                -  Highest Average Long Term Temperature
  5  0x048  1                -  Lowest Average Long Term Temperature
  5  0x050  4                0  Time in Over-Temperature
  5  0x058  1               70  Specified Maximum Operating Temperature
  5  0x060  4                0  Time in Under-Temperature
  5  0x068  1                0  Specified Minimum Operating Temperature
  6  =====  =                =  == Transport Statistics (rev 1) ==
  6  0x008  4                0  Number of Hardware Resets
  6  0x010  4                0  Number of ASR Events
  6  0x018  4                0  Number of Interface CRC Errors
  7  =====  =                =  == Solid State Device Statistics (rev 1) ==
  7  0x008  1                0~ Percentage Used Endurance Indicator
                              |_ ~ normalized value

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x000a  4            0  Device-to-host register FISes sent due to a COMRESET


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to