Please find attached a submission for the disk SAMSUNG MZNLN256HMHQ-000H1
This device may not support self-tests but I trust this output may still be of
use to the project.
smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win10] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZNLN256HMHQ-000H1
Firmware Version: MAV21H3Q
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: < 1.8 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Sep 12 16:58:30 2017 GMTST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5100) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
9 Power_On_Hours -O--CK 100 100 000 - 5
12 Power_Cycle_Count -O--CK 100 100 000 - 24
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
173 Unknown_Attribute -O--CK 100 100 005 - 0
174 Unknown_Attribute -O--CK 100 100 000 - 18
176 Erase_Fail_Count_Chip -O---K 100 100 000 - 806
181 Program_Fail_Cnt_Total -O---K 098 098 000 - 25593710116863
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO-RCK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 1
194 Temperature_Celsius -O---K 051 053 000 - 51 (Min/Max 33/51)
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
241 Total_LBAs_Written -O--CK 100 100 000 - 6536
242 Total_LBAs_Read -O--CK 100 100 000 - 3809
243 Unknown_Attribute -O--CK 100 100 000 - 9353
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0a GPL R/W 1 Device Statistics Notification
0x0c GPL R/O 1 Pending Defects log
0x0d GPL,SL R/O 1 LPS Mis-alignment log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x19 GPL R/O 8 LBA Status log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was completed without error
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 42 Celsius
Power Cycle Min/Max Temperature: ?/42 Celsius
Lifetime Min/Max Temperature: 27/52 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (59)
Index Estimated Time Temperature Celsius
60 2017-09-11 19:40 ? -
... ..( 66 skipped). .. -
127 2017-09-12 06:50 ? -
0 2017-09-12 07:00 36 *****************
1 2017-09-12 07:10 ? -
... ..( 7 skipped). .. -
9 2017-09-12 08:30 ? -
10 2017-09-12 08:40 36 *****************
11 2017-09-12 08:50 45 **************************
12 2017-09-12 09:00 ? -
13 2017-09-12 09:10 ? -
14 2017-09-12 09:20 ? -
15 2017-09-12 09:30 37 ******************
16 2017-09-12 09:40 35 ****************
17 2017-09-12 09:50 37 ******************
18 2017-09-12 10:00 40 *********************
19 2017-09-12 10:10 ? -
... ..( 2 skipped). .. -
22 2017-09-12 10:40 ? -
23 2017-09-12 10:50 36 *****************
24 2017-09-12 11:00 ? -
25 2017-09-12 11:10 ? -
26 2017-09-12 11:20 ? -
27 2017-09-12 11:30 51 ********************************
28 2017-09-12 11:40 52 *********************************
29 2017-09-12 11:50 45 **************************
30 2017-09-12 12:00 ? -
31 2017-09-12 12:10 ? -
32 2017-09-12 12:20 51 ********************************
33 2017-09-12 12:30 42 ***********************
34 2017-09-12 12:40 42 ***********************
35 2017-09-12 12:50 35 ****************
36 2017-09-12 13:00 45 **************************
37 2017-09-12 13:10 45 **************************
38 2017-09-12 13:20 52 *********************************
39 2017-09-12 13:30 ? -
... ..( 3 skipped). .. -
43 2017-09-12 14:10 ? -
44 2017-09-12 14:20 38 *******************
45 2017-09-12 14:30 38 *******************
46 2017-09-12 14:40 38 *******************
47 2017-09-12 14:50 37 ******************
... ..( 2 skipped). .. ******************
50 2017-09-12 15:20 37 ******************
51 2017-09-12 15:30 ? -
52 2017-09-12 15:40 30 ***********
53 2017-09-12 15:50 27 ********
54 2017-09-12 16:00 37 ******************
55 2017-09-12 16:10 ? -
56 2017-09-12 16:20 ? -
57 2017-09-12 16:30 35 ****************
58 2017-09-12 16:40 40 *********************
59 2017-09-12 16:50 42 ***********************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 24 -D- Lifetime Power-On Resets
0x01 0x010 4 5 -D- Power-on Hours
0x01 0x018 6 214193782 -D- Logical Sectors Written
0x01 0x020 6 2134394 -D- Number of Write Commands
0x01 0x028 6 124838118 -D- Logical Sectors Read
0x01 0x030 6 1572780 -D- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors
0x04 0x010 4 1 -D- Resets Between Cmd Acceptance and
Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 42 -D- Current Temperature
0x05 0x020 1 52 -D- Highest Temperature
0x05 0x028 1 27 -D- Lowest Temperature
0x05 0x058 1 55 -D- Specified Maximum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 90 -D- Number of Hardware Resets
0x06 0x010 4 0 -D- Number of ASR Events
0x06 0x018 4 0 -D- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 ND- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4829 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
