Am 02.10.2015 um 09:19 schrieb a b <[email protected]>: > > > What do I need to do to trigger the growing of the pool (including the GPT > > label)? > > zpool set autoexpand=on pool_name > > Then, replace the drives one by one, waiting for each drive to resilver > before replacing the next one. > Once the last drive is replaced, the pool capacity should automatically > reflect the new total capacity.
As I explained, there will be no mirroring and no replacing of disks. Just one disk that is larger than the image that was written to the disk. Will autoexpand also work in that case, i.e. when the system boots to find a larger disk then what is in the GPT label? > > Will the GRUB boot code still function even if the disk geometry is > > different on the > > target disk? I believe it should work if LBA addressing is used. > > Yes it will, in RAID1+0 (mirroring). As far as I am aware, no other > configurations currently work for booting. Non-mirrored (single disk) should also work for booting IMHO. ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
