PRESTO!!
Your build worked!
What I did was put in another Intel card and:
]# dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
e1000g0 Ethernet up 100 full e1000g0
bge0 Ethernet down 0 unknown bge0
[root@00-1b-21-30-e9-be ~]# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.16.30.65 netmask ffffff00 broadcast 172.16.30.255
ether 0:1b:21:30:e9:be
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
# admin_nic is the nic admin_ip will be connected to for headnode zones.
admin_nic=0:1b:21:30:e9:be
admin_ip=172.16.30.65
admin_netmask=255.255.255.0
admin_network=...
admin_gateway=172.16.30.65
headnode_default_gateway=172.16.30.80
I CAN PING THE GATEWAY!!
]# ping 172.16.30.80
172.16.30.80 is alive
GOOGLE!
# ping www.google.com
www.google.com is alive
Thanks peter!!
Now I test the onboard bge0 with your build and then I will test the intel
card with the latest smartOs image!
NB: I just got the intel NIC card today also!
WOW!
I almost a gave up to go to xen!
From: Peter Kelm via smartos-discuss
[mailto:[email protected]]
Sent: Monday, September 22, 2014 4:16 PM
To: [email protected]; [email protected]
Subject: Re: [smartos-discuss] Network Problem
Not sure whether your case is similar than mine but I had issues getting the
stock SmartOS bge driver play nicely with my machine's BCM5720 ethernet
chipsets. Like yours it was detected properly, showed up like yours in
dladm,... Yet, it was totally unusable at Gigabit speed. Worked okay only
when plugged into a Fast Ethernet switch. What connection speed do you use?
FYI: BroadCom publishes the driver source (for Solaris) on their website and
it turned out that this can be integrated fairly easily as a custom driver
into a SmartOS build. I am running such a custom build since January without
issues. Let me know if you'd like to try my custom USB build on your
hardware and I can put the USB install image up on the net.
Peter
Am 22.09.2014 um 15:38 schrieb [email protected]:
· Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe
* Driver: bge
* PCI ID: 14e4,165b
* Originating manifest: driver-network-bge.mf
According to: <http://illumos.org/hcl/> http://illumos.org/hcl/
And thats my card, so why cant I get networking up?!
From: <mailto:[email protected]>
[email protected] [mailto:smartos-
<mailto:[email protected]> [email protected]]
Sent: Friday, September 19, 2014 1:11 PM
To: <mailto:[email protected]>
[email protected]; <mailto:[email protected]>
[email protected]
Subject: RE: [smartos-discuss] Network Problem
Correction:
# dladm show-link
LINK CLASS MTU STATE BRIDGE OVER
bge0 phys 1500 up -- --
From: <mailto:[email protected]>
[email protected] [
<mailto:[email protected]>
mailto:[email protected]]
Sent: Friday, September 19, 2014 1:06 PM
To: <mailto:[email protected]>
[email protected]; <mailto:[email protected]>
[email protected]
Subject: RE: [smartos-discuss] Network Problem
# prtconf -dD | grep bge
pci103c,705d (pciex14e4,165b) [Broadcom Corporation NetXtreme
BCM5723 Gigabit Ethernet PCIe], instance #0 (driver name: bge)
# dladm show-link
LINK CLASS MTU STATE BRIDGE OVER
bge0 phys 1500 down -- --
Still cant ping out
or oing the server from the LAN.
From: <mailto:[email protected]>
[email protected] [
<mailto:[email protected]>
mailto:[email protected]]
Sent: Wednesday, September 17, 2014 9:03 AM
To: <mailto:[email protected]>
[email protected]; <mailto:[email protected]>
[email protected]
Subject: RE: [smartos-discuss] Network Problem
Ok, as advised on IRC #smartos, I connected to the server via the serial
port. Now can copy and paste.
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.1.2 netmask ffffff00 broadcast 192.168.1.255
ether b4:b5:2f:a0:c1:36
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
# dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
bge0 Ethernet up 100 full bge0
# cat /usbkey/config
#
# This file was auto-generated and must be source-able by bash.
#
# admin_nic is the nic admin_ip will be connected to for headnode zones.
admin_nic=b4:b5:2f:a0:c1:36
admin_ip=192.168.1.2
admin_netmask=255.255.255.0
admin_network=...
admin_gateway=192.168.1.2
headnode_default_gateway=192.168.1.1
dns_resolvers=8.8.8.8,8.8.4.4
dns_domain=<*dn*>.co.zm
ntp_hosts=0. <http://smartos.pool.ntp.org/> smartos.pool.ntp.org
compute_node_ntp_hosts=192.168.1.24
From: <mailto:[email protected]>
[email protected] [
<mailto:[email protected]>
mailto:[email protected]]
Sent: Tuesday, September 16, 2014 5:49 PM
To: <mailto:[email protected]>
[email protected]; 'Usama Ahmad'
Subject: RE: [smartos-discuss] Network Problem
Zpool import zones fails saying cant import zones; a pool with the same
name is already creaded/imported
Login in as root/root also fails
From: Usama Ahmad via smartos-discuss [
<mailto:[email protected]>
mailto:[email protected]]
Sent: Sunday, September 07, 2014 10:20 PM
To: <mailto:[email protected]>
[email protected]
Subject: Re: [smartos-discuss] Network Problem
Boot into noinstall mode
login user/pass is root/root
zpool import zones
zpool destroy zones
reboot
And you are done it will start up asking initial config questions
On Sun, Sep 7, 2014 at 3:47 PM, < <mailto:[email protected]>
[email protected]> wrote:
Maybe try to reinstall SmartOS by rebooting into no install mode and zpool
destroy zones. Time to fire up google I guess, talk about a newbie stuck on
a nic issue
From: Usama Ahmad via smartos-discuss [mailto:
<mailto:[email protected]>
[email protected]]
Sent: Sunday, September 07, 2014 7:47 PM
To: <mailto:[email protected]>
[email protected]; <mailto:[email protected]>
[email protected]
Subject: RE: [smartos-discuss] Network Problem
On Sep 6, 2014 6:58 AM, < <mailto:[email protected]>
[email protected]> wrote:
>
> Hi
>
> Please note that I cant even ssh into the server. So cant copy
> /usbkey/config, I have to type out ...
>
> 1. /usbkey/config
>
> admin_ip=192.168.1.2
> admin_netmask=255.255.255.0
> admin_network=...
> admin_gateway=192.168.1.2
>
> headnode_default_gateway=192.168.1.1
>
> dns_resolvers=8.8.8.8,8.8.8.4
>
> 2.dlam show-phys
>
> Link media state speed duplex device
> bge0 ethernet up 100 full bge0
>
> 3. ifconfig -a
>
> bge0:
> inet 192.168.1.2
>
> 4. netstat -rn -f inet
> Destination Gateway interface
> Default 192.168.1.1 bge0
> 192.168.1.0 192.168.1.2 bge0
>
> 5.ipadm show-addr
> Bge0 static ok <http://192.168.1.2/24> 192.168.1.2/24
>
> 6.#ping 192.168.1.2
> 192.168.1.2 is alive
>
> 7. ping 192.168.1.1
> No answer from 192.168.1.1
>
> 8. unplug cable from server and connect to mylaptop with same
ip192.168.1.2,
> I can ping 192.168.1.1
>
> !?
Hello,
Could you try to change your IP address for box from 192.168.1.2 to
something else for example 192.168.1.101 or any other unused IP. This is to
rule out your router as the bottle neck since you mention same IP used for
your laptop.
Keep hope, it should work, most likely something very simple and basic is
causing this issue.
Maybe try to reinstall SmartOS by rebooting into no install mode and zpool
destroy zones.
Hope this helps.
Usama
>
> -----Original Message-----
> From: Jonathan Perkin via smartos-discuss
> [mailto: <mailto:[email protected]>
[email protected]]
> Sent: Friday, September 05, 2014 4:02 PM
> To: <mailto:[email protected]>
[email protected]; <mailto:[email protected]>
[email protected]
> Subject: Re: [smartos-discuss] Network Problem
>
> It's difficult to diagnose your problem without seeing all the details,
and
> it doesn't help that your mail client likes to mangle plain text so that
we
> cannot be sure your settings are correct.
>
> If you provided plain text attachments of the following:
>
> - /usbkey/config
> - 'dladm show-phys' output
> - 'ifconfig -a' output
> - 'netstat -rn -f inet' output
> - anything else you think may be relevant for your setup
>
> we may be able to help. The rule of thumb is that you can never provide
too
> much information.
>
> Thanks,
>
> --
> Jonathan Perkin - Joyent, Inc. - <http://www.joyent.com/>
www.joyent.com
>
>
> -------------------------------------------
> smartos-discuss
> Archives: <https://www.listbox.com/member/archive/184463/=now>
https://www.listbox.com/member/archive/184463/=now
> RSS Feed:
> <https://www.listbox.com/member/archive/rss/184463/26461380-1faa08ce>
https://www.listbox.com/member/archive/rss/184463/26461380-1faa08ce
> Modify Your Subscription:
> <https://www.listbox.com/member/?&;> https://www.listbox.com/member/?&;
> 78
> Powered by Listbox: <http://www.listbox.com/> http://www.listbox.com
>
>
>
> -------------------------------------------
> smartos-discuss
> Archives: <https://www.listbox.com/member/archive/184463/=now>
https://www.listbox.com/member/archive/184463/=now
> RSS Feed:
<https://www.listbox.com/member/archive/rss/184463/24697919-04ed9bf0>
https://www.listbox.com/member/archive/rss/184463/24697919-04ed9bf0
> Modify Your Subscription: <https://www.listbox.com/member/?&;>
https://www.listbox.com/member/?&;
> Powered by Listbox: <http://www.listbox.com/> http://www.listbox.com
smartos-discuss | <https://www.listbox.com/member/archive/184463/=now>
Archives
<https://www.listbox.com/member/archive/rss/184463/26461380-1faa08ce> |
<https://www.listbox.com/member/?&;> Modify Your Subscription
<http://www.listbox.com/>
smartos-discuss | <https://www.listbox.com/member/archive/184463/=now>
Archives
<https://www.listbox.com/member/archive/rss/184463/26461380-1faa08ce> |
<https://www.listbox.com/member/?&;> Modify Your Subscription
<http://www.listbox.com/>
smartos-discuss | <https://www.listbox.com/member/archive/184463/=now>
Archives
<https://www.listbox.com/member/archive/rss/184463/26461380-1faa08ce> |
<https://www.listbox.com/member/?&;> Modify Your Subscription
<http://www.listbox.com/>
smartos-discuss | <https://www.listbox.com/member/archive/184463/=now>
Archives
<https://www.listbox.com/member/archive/rss/184463/26461380-1faa08ce> |
<https://www.listbox.com/member/?&;> Modify Your Subscription
<http://www.listbox.com/>
smartos-discuss | <https://www.listbox.com/member/archive/184463/=now>
Archives
<https://www.listbox.com/member/archive/rss/184463/26461380-1faa08ce> |
<https://www.listbox.com/member/?&;> Modify Your Subscription
<http://www.listbox.com/>
smartos-discuss | <https://www.listbox.com/member/archive/184463/=now>
Archives
<https://www.listbox.com/member/archive/rss/184463/26461380-1faa08ce> |
<https://www.listbox.com/member/?&;> Modify Your Subscription
<http://www.listbox.com/>
smartos-discuss | <https://www.listbox.com/member/archive/184463/=now>
Archives
<https://www.listbox.com/member/archive/rss/184463/25252853-72390e47> |
<https://www.listbox.com/member/?&;> Modify Your Subscription
<http://www.listbox.com/>
Kelm Engineering
Karl-Bröger-Str. 46
91074 Herzogenaurach
Germany
Tel: +49 (9132) 745325
Fax: +49 (9132) 9060596
eMail: [email protected]
smartos-discuss | <https://www.listbox.com/member/archive/184463/=now>
Archives
<https://www.listbox.com/member/archive/rss/184463/26461380-1faa08ce> |
<https://www.listbox.com/member/?&;
078> Modify Your Subscription
<http://www.listbox.com>
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
