On 3/23/16 8:22 , Richard Elling wrote: > >> On Mar 23, 2016, at 6:59 AM, Robert Mustacchi <[email protected]> wrote: >> >> On 3/23/16 2:00 , Benny Kjellgren wrote: >>> Thank you >>> >>> "-B pci-reprog=off" solved my problem with SmartOS not booting up. >>> >>> And have changed from raidz1 with pair of mirrored disks LV >>> to raidz2 with single disk raid 0 LV + one spare >> >> I'm glad that you've got this workaround working; however, if either you >> or Richard could still boot up the system with -kd without doing the -B >> pci-reprog=off and relay where we're panciking, that'd be quite helpful. > > Unfortunately, there is no panic. If there were a panic, we'd be well on our > way :-)
So you're seeing a hard reset of the system then? Can you break through bge_attach() and step over parts of it to see where we're going awry? >> >> I'd like to make sure we get to root cause on this so these workarounds >> aren't necessary. Unfortunately right now we don't have enough >> information to make progress on that. > > Agree, and there is precious little public doc on how these things are built. > Strange PCI configurations are known to cause problems in the past, leading > to unpredictable behaviour. We suspect similar here. We'll map out the PCI > fabric as a next step, however that will be model specific. Okay, please keep us posted as soon as you have any additional information. I'd like to make sure we don't lose track of these and get them root caused (along with the x2apic issues). Robert ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
