Hi Robert,
seems like a driver problem to me... Found some other users in the illumos
forum which have problems with that chipset.
dladm show-aggr -x
LINK PORT SPEED DUPLEX STATE ADDRESS PORTSTATE
aggr0 -- 1000Mb full up 44:a8:42:34:87:63 --
bge0 1000Mb full up 44:a8:42:34:87:63 attached
bge1 1000Mb full up 44:a8:42:34:87:64 attached
The strange thing is:
While i'm running "snoop -d aggr0" i am able to ping every other host in the
subnet and the outgoing mac-address seems to be right. When i'm canceling
snoop, the failure is back again and i can only ping some host in the subnet.
I think i'm going to put another network-card into the host ...
Greets
Kilian
________________________________________
Von: Robert Mustacchi <[email protected]>
Gesendet: Freitag, 8. April 2016 15:59
An: [email protected]
Betreff: Re: [smartos-discuss] Link Aggregation Problem
On 4/8/16 6:39 , Kilian Ries wrote:
> When i configure a link aggregation, i'm seeing on the switch that the
> SmartOS host is sending some packets from MAC-address1 and some packets from
> MAC-address2. The normal behaviour should be that it is only sending from one
> MAC-Address.
Hi,
You're right, that is a bit surprising. So, if you take a look at dladm
show-aggr -x, you should see what we think the various MAC addresses
involved are. You can take a look at that with dladm show-aggr -x.
Which device do you see the improper mac address going out? I'd suggest
using snoop in the global zone. Also, does this happen with all traffic,
only specific flows, something else?
Thanks,
Robert
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
