Any thoughts? > On Jun 17, 2016, at 1:17 PM, Youzhong Yang <[email protected]> wrote: > > Hi Hans, > > The drivers won't show up in command output of 'diskinfo' or 'format'. > > Please refer to the attachment: > > - ls /dev/dsk and /dev/rdsk reported broken sym links > - once I ran devfsadm -C, those broken links disappeared, then iostat -En > reported those drives as blkdev* > > Thanks for your quick reply. > > -- Youzhong > >> On Fri, Jun 17, 2016 at 12:49 PM, Hans Rosenfeld >> <[email protected]> wrote: >> Hi, >> >> On Fri, Jun 17, 2016 at 12:01:18PM -0400, Youzhong Yang wrote: >> > Since NVMe driver has been in illumos for quite a while, so we decided to >> > get an evaluation unit and see how it goes. Here is what we got: >> > >> > Baseboad: Supermicro X10DRU-i+ (System SYS-2028U-TN24R4T+) >> > Memory: 768G >> > CPU: 2 x Intel(R) Xeon(R) CPU E5-2683 v4 @ 2.10GHz, each with 16 physical >> > cores, 32 hyper-threaded cores >> > SATA SSDs: 2 x Intel DC S3100 1TB (SSDSC2KI010X601) >> > NVMe SSDs: 2 x Intel DC P3700 800GB (SSDPE2MD800G4) >> > NVMe SSDs: 22 x Intel DC P3600 400GB (SSDPE2ME400G4) >> > Ethernet: Ethernet Controller X710 for 10GbE SFP+ >> >> > Attached are some files with information of the system such as prtconf, >> > nvme.conf etc. (we pulled out some drives, left only two INTEL DC 3100 >> > SSDs, one Intel DC P3700, three Intel DC P3600 SSDs in place). >> >> > c2t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 >> > Model: INTEL SSDPE2ME400G4 Revision: 8DV10171 Serial >> > No: CVMD50510009400FGN >> > Size: 400.09GB <400088457216 bytes> >> > Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 >> > Illegal Request: 0 Predictive Failure Analysis: 0 >> > c0t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 >> > Model: INTEL SSDPE2MD800G4 Revision: 8DV10171 Serial >> > No: CVFT4222002Q800HGN >> > Size: 800.17GB <800166076416 bytes> >> > Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 >> > Illegal Request: 0 Predictive Failure Analysis: 0 >> > c1t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 >> > Model: INTEL SSDPE2ME400G4 Revision: 8DV10171 Serial >> > No: CVMD5051000Z400FGN >> > Size: 400.09GB <400088457216 bytes> >> > Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 >> > Illegal Request: 0 Predictive Failure Analysis: 0 >> > c3t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 >> > Model: INTEL SSDPE2ME400G4 Revision: 8DV10171 Serial >> > No: CVMD4450003A400FGN >> > Size: 400.09GB <400088457216 bytes> >> > Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 >> > Illegal Request: 0 Predictive Failure Analysis: 0 >> >> Looks like iostat -En shows the remaining 4 NVMe devices correctly. They >> also show up correctly in messages and prtconf. >> >> What did you do to check whether they "show up"? format(1M) or some >> other tool? >> >> Hans >> >> -- >> %SYSTEM-F-ANARCHISM, The operating system has been overthrown >> > > <nvme-disks.txt>
------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
