Thanks Richard ‘diskinfo’ shows both disks as being 2TB. I think the problem is related to how I am accessing the disks. This is a s/h Dell T310 that’s fitted with a PERC 6/i.
There doesn’t seem to be any way to disable the PERC so I set it up to see each disk in its own array of one disk. Smartos then sees the disks as two separate disks and I was able to get going. Thanks Gareth On 2 February 2017 at 16:01:36, Robert Mustacchi ([email protected]) wrote: On 2/2/17 7:58 , Richard Elling wrote: > >> On Feb 2, 2017, at 7:31 AM, Gareth Howell <[email protected]> wrote: >> >> Hi >> I’ve just upgraded the two mirrored disks in my zones pool from 1TB disks to 3TB disks by replacing each in turn and then doing zpool replace. >> >> I then did >> 'pool scrub' >> and >> 'zpool set autoexpand=on' >> >> I expected 'zpool get size' to show 3TB, but it only shows 2TB. > > This can happen if the drive is SATA and the BIOS > is set to IDE emulation mode. In such cases, the > driver won't be sd, so in iostat -x it will not be sd# I'd also confirm what size diskinfo sees with it. Robert ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
