Perc6 is limited to 2TB with SATA disks. It may be able to use 3TB SAS disks (not personally confirmed)
On Thu, Feb 2, 2017 at 11:13 AM, Gareth Howell <[email protected]> wrote: > Thanks Richard > ‘diskinfo’ shows both disks as being 2TB. > > I think the problem is related to how I am accessing the disks. This is a > s/h Dell T310 that’s fitted with a PERC 6/i. > > There doesn’t seem to be any way to disable the PERC so I set it up to see > each disk in its own array of one disk. Smartos then sees the disks as two > separate disks and I was able to get going. > > Thanks > > Gareth > > On 2 February 2017 at 16:01:36, Robert Mustacchi ([email protected]) wrote: > > On 2/2/17 7:58 , Richard Elling wrote: > > > >> On Feb 2, 2017, at 7:31 AM, Gareth Howell <[email protected]> > wrote: > >> > >> Hi > >> I’ve just upgraded the two mirrored disks in my zones pool from 1TB > disks to 3TB disks by replacing each in turn and then doing zpool replace. > >> > >> I then did > >> 'pool scrub' > >> and > >> 'zpool set autoexpand=on' > >> > >> I expected 'zpool get size' to show 3TB, but it only shows 2TB. > > > > This can happen if the drive is SATA and the BIOS > > is set to IDE emulation mode. In such cases, the > > driver won't be sd, so in iostat -x it will not be sd# > > I'd also confirm what size diskinfo sees with it. > > Robert > > > > http://www.listbox.com > > *smartos-discuss* | Archives > <https://www.listbox.com/member/archive/184463/=now> > <https://www.listbox.com/member/archive/rss/184463/28000953-e4c62bf7> | > Modify > <https://www.listbox.com/member/?&;> > Your Subscription <http://www.listbox.com> > > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
