I mean, to look at the property it gives [root@testsrv ~]# dladm show-linkprop -z 1edddb02-3e44-6854-a461-c8a9c866f39c -p maxbw net0 LINK PROPERTY PERM VALUE DEFAULT POSSIBLE net0 maxbw rw -- -- --
And then there is no [root@testsrv ~]# dladm set-linkprop -z 1edddb02-3e44-6854-a461-c8a9c866f39c -p maxbw=10 net0 dladm: warning: cannot set link property 'maxbw' on 'net0': invalid argument 2017-08-30 12:02 GMT+03:00 Tiraen <[email protected]>: > And this team from the global zone periodically issues this way. Although > initially worked. I do not quite understand what this might be related to > > dladm set-linkprop -z d8117d3c-0aee-6644-abfc-9629a3bf576b -p maxbw=110 > net0 > dladm: warning: cannot set link property 'maxbw' on 'net0': invalid > argument > > 2017-08-30 2:51 GMT+03:00 Tiraen <[email protected]>: > >> Thanks >> Does this work only with the OS type of virtual machines? With KVM >> apparently not >> >> 2017-08-29 3:08 GMT+03:00 Matthew Parsons <[email protected]>: >> >>> (My answer is basic and likely incomplete, others may have better >>> details, but since nobody has answered yet...) >>> >>> If I understand your question correctly, you're asking if you configure >>> the networking bandwidth during zone creation with vmadm? I can 99.8% say >>> that no, you cannot. VMadm creates/modifies only minimal networking in >>> zones, additional configuration/provisioning is either manually or via the >>> config management of your choice. You can assign max bandwidth with dladm, >>> from the Global Zone. There is also flowadm that looks like it's layered >>> on top (allowing more granular control), but I haven't touched it yet. >>> >>> ~$ iperf -c somezone >>> ------------------------------------------------------------ >>> Client connecting to nodemin, TCP port 5001 >>> TCP window size: 512 KByte (default) >>> ------------------------------------------------------------ >>> [ 3] local 192.168.1.126 port 34476 connected with 192.168.1.238 port >>> 5001 >>> [ ID] Interval Transfer Bandwidth >>> [ 3] 0.0-10.0 sec 1.07 GBytes 921 Mbits/sec >>> >>> >>> [root@gz /]# dladm set-linkprop -z da4a549d-5426-edec-fe79-c95a4043e715 >>> -p maxbw=10 net0 >>> >>> ~$ iperf -c somezone >>> ------------------------------------------------------------ >>> Client connecting to nodemin, TCP port 5001 >>> TCP window size: 512 KByte (default) >>> ------------------------------------------------------------ >>> [ 3] local 192.168.1.126 port 36018 connected with 192.168.1.238 port >>> 5001 >>> [ ID] Interval Transfer Bandwidth >>> [ 3] 0.0-18.9 sec 256 KBytes 111 Kbits/sec >>> >>> >>> >>> >>> >>> >>> >>> On Mon, Aug 28, 2017 at 8:45 AM, Tiraen <[email protected]> wrote: >>> >>>> Good afternoon, the question of such a plan. I correctly understood, >>>> judging by the man pages >>>> and what gives >>>> dladm show-linkprop >>>> >>>> At the moment, bandwidth of the channel is not yet realized when >>>> creating a virtual machine? >>>> >>>> Is there any more or less sane way for this? >>>> >>>> >>>> >>>> >>>> >>>> net0 promisc-filtered rw off on off,on >>>> LINK PROPERTY PERM VALUE DEFAULT POSSIBLE >>>> net0 allowed-ips rw -- -- -- >>>> net0 allowed-dhcp-cids rw -- -- -- >>>> net0 rxrings rw -- -- -- >>>> net0 rxrings-effective r- -- -- -- >>>> net0 txrings rw -- -- -- >>>> net0 txrings-effective r- -- -- -- >>>> net0 txrings-available r- 0 -- -- >>>> net0 rxrings-available r- 0 -- -- >>>> net0 rxhwclnt-available r- 0 -- -- >>>> net0 txhwclnt-available r- 0 -- -- >>>> net0 autopush rw -- -- -- >>>> net0 zone rw d8117d3c-0aee-6644-abfc-9629a3bf576b >>>> -- -- >>>> net0 state r- up up up,down >>>> net0 mtu rw 1500 1500 1500 >>>> net0 secondary-macs rw -- -- -- >>>> net0 maxbw rw -- -- -- >>>> net0 cpus rw -- -- -- >>>> net0 cpus-effective r- 0,7 -- -- >>>> net0 pool rw -- -- -- >>>> net0 pool-effective r- -- -- -- >>>> net0 priority rw high high >>>> low,medium,high >>>> net0 tagmode rw vlanonly vlanonly >>>> normal,vlanonly >>>> net0 protection rw restricted, -- >>>> mac-nospoof, >>>> dhcp-nospoof >>>> restricted, >>>> >>>> ip-nospoof, >>>> >>>> dhcp-nospoof >>>> net0 promisc-filtered rw off on off,on >>>> net0 allowed-ips rw -- -- -- >>>> net0 allowed-dhcp-cids rw -- -- -- >>>> net0 rxrings rw -- -- -- >>>> net0 rxrings-effective r- -- -- -- >>>> net0 txrings rw -- -- -- >>>> net0 txrings-effective r- -- -- -- >>>> net0 txrings-available r- 0 -- -- >>>> net0 rxrings-available r- 0 -- -- >>>> net0 rxhwclnt-available r- 0 -- -- >>>> net0 txhwclnt-available r- 0 -- -- >>>> >>>> -- >>>> With best regards, >>>> >>>> Vyacheslav Yakushev, >>>> >>>> Unix system administrator >>>> >>>> https://t.me/kelewind >>>> >>> >>> *smartos-discuss* | Archives >>> <https://www.listbox.com/member/archive/184463/=now> >>> <https://www.listbox.com/member/archive/rss/184463/27247476-87b4fc40> | >>> Modify >>> <https://www.listbox.com/member/?&;> >>> Your Subscription <http://www.listbox.com> >>> >> >> >> >> -- >> With best regards, >> >> Vyacheslav Yakushev, >> >> Unix system administrator >> >> https://t.me/kelewind >> > > > > -- > With best regards, > > Vyacheslav Yakushev, > > Unix system administrator > > https://t.me/kelewind > -- With best regards, Vyacheslav Yakushev, Unix system administrator https://t.me/kelewind ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
