It was a remote terminal error. In the other everything is normal But then I noticed a moment like this:
1) For OS it works like shaping of incoming and outgoing channel 2) For kvm - only outgoing traffic. Is there any way to limit kvm like a zone (rx/tx) using this tool? 2017-08-30 13:56 GMT+03:00 Tiraen <[email protected]>: > Those with the sight of all the operations on working with the link except > the speed setting work fine > > I do not quite understand what's wrong with the argument transfer format. > > > [root@testsrv ~]# dladm show-linkprop -z 1edddb02-3e44-6854-a461-c8a9c866f39c > -p maxbw net0 > LINK PROPERTY PERM VALUE DEFAULT POSSIBLE > net0 maxbw rw -- -- -- > > [root@testsrv ~]# dladm reset-linkprop -z 1edddb02-3e44-6854-a461-c8a9c866f39c > -p maxbw net0 > > [root@testsrv ~]# dladm set-linkprop -z 1edddb02-3e44-6854-a461-c8a9c866f39c > -p maxbw=10 net0 > dladm: warning: cannot set link property 'maxbw' on 'net0': invalid > argument > > 2017-08-30 12:39 GMT+03:00 Tiraen <[email protected]>: > >> I mean, to look at the property it gives >> >> [root@testsrv ~]# dladm show-linkprop -z 1edddb02-3e44-6854-a461-c8a9c866f39c >> -p maxbw net0 >> LINK PROPERTY PERM VALUE DEFAULT POSSIBLE >> net0 maxbw rw -- -- -- >> >> And then there is no >> >> [root@testsrv ~]# dladm set-linkprop -z 1edddb02-3e44-6854-a461-c8a9c866f39c >> -p maxbw=10 net0 >> dladm: warning: cannot set link property 'maxbw' on 'net0': invalid >> argument >> >> >> 2017-08-30 12:02 GMT+03:00 Tiraen <[email protected]>: >> >>> And this team from the global zone periodically issues this way. >>> Although initially worked. I do not quite understand what this might be >>> related to >>> >>> dladm set-linkprop -z d8117d3c-0aee-6644-abfc-9629a3bf576b -p maxbw=110 >>> net0 >>> dladm: warning: cannot set link property 'maxbw' on 'net0': invalid >>> argument >>> >>> 2017-08-30 2:51 GMT+03:00 Tiraen <[email protected]>: >>> >>>> Thanks >>>> Does this work only with the OS type of virtual machines? With KVM >>>> apparently not >>>> >>>> 2017-08-29 3:08 GMT+03:00 Matthew Parsons <[email protected]>: >>>> >>>>> (My answer is basic and likely incomplete, others may have better >>>>> details, but since nobody has answered yet...) >>>>> >>>>> If I understand your question correctly, you're asking if you >>>>> configure the networking bandwidth during zone creation with vmadm? I can >>>>> 99.8% say that no, you cannot. VMadm creates/modifies only minimal >>>>> networking in zones, additional configuration/provisioning is either >>>>> manually or via the config management of your choice. You can assign max >>>>> bandwidth with dladm, from the Global Zone. There is also flowadm that >>>>> looks like it's layered on top (allowing more granular control), but I >>>>> haven't touched it yet. >>>>> >>>>> ~$ iperf -c somezone >>>>> ------------------------------------------------------------ >>>>> Client connecting to nodemin, TCP port 5001 >>>>> TCP window size: 512 KByte (default) >>>>> ------------------------------------------------------------ >>>>> [ 3] local 192.168.1.126 port 34476 connected with 192.168.1.238 port >>>>> 5001 >>>>> [ ID] Interval Transfer Bandwidth >>>>> [ 3] 0.0-10.0 sec 1.07 GBytes 921 Mbits/sec >>>>> >>>>> >>>>> [root@gz /]# dladm set-linkprop -z da4a549d-5426-edec-fe79-c95a4043e715 >>>>> -p maxbw=10 net0 >>>>> >>>>> ~$ iperf -c somezone >>>>> ------------------------------------------------------------ >>>>> Client connecting to nodemin, TCP port 5001 >>>>> TCP window size: 512 KByte (default) >>>>> ------------------------------------------------------------ >>>>> [ 3] local 192.168.1.126 port 36018 connected with 192.168.1.238 port >>>>> 5001 >>>>> [ ID] Interval Transfer Bandwidth >>>>> [ 3] 0.0-18.9 sec 256 KBytes 111 Kbits/sec >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Mon, Aug 28, 2017 at 8:45 AM, Tiraen <[email protected]> wrote: >>>>> >>>>>> Good afternoon, the question of such a plan. I correctly understood, >>>>>> judging by the man pages >>>>>> and what gives >>>>>> dladm show-linkprop >>>>>> >>>>>> At the moment, bandwidth of the channel is not yet realized when >>>>>> creating a virtual machine? >>>>>> >>>>>> Is there any more or less sane way for this? >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> net0 promisc-filtered rw off on off,on >>>>>> LINK PROPERTY PERM VALUE DEFAULT >>>>>> POSSIBLE >>>>>> net0 allowed-ips rw -- -- -- >>>>>> net0 allowed-dhcp-cids rw -- -- -- >>>>>> net0 rxrings rw -- -- -- >>>>>> net0 rxrings-effective r- -- -- -- >>>>>> net0 txrings rw -- -- -- >>>>>> net0 txrings-effective r- -- -- -- >>>>>> net0 txrings-available r- 0 -- -- >>>>>> net0 rxrings-available r- 0 -- -- >>>>>> net0 rxhwclnt-available r- 0 -- -- >>>>>> net0 txhwclnt-available r- 0 -- -- >>>>>> net0 autopush rw -- -- -- >>>>>> net0 zone rw d8117d3c-0aee-6644-abfc-9629a3bf576b >>>>>> -- -- >>>>>> net0 state r- up up >>>>>> up,down >>>>>> net0 mtu rw 1500 1500 1500 >>>>>> net0 secondary-macs rw -- -- -- >>>>>> net0 maxbw rw -- -- -- >>>>>> net0 cpus rw -- -- -- >>>>>> net0 cpus-effective r- 0,7 -- -- >>>>>> net0 pool rw -- -- -- >>>>>> net0 pool-effective r- -- -- -- >>>>>> net0 priority rw high high >>>>>> low,medium,high >>>>>> net0 tagmode rw vlanonly vlanonly >>>>>> normal,vlanonly >>>>>> net0 protection rw restricted, -- >>>>>> mac-nospoof, >>>>>> dhcp-nospoof >>>>>> restricted, >>>>>> >>>>>> ip-nospoof, >>>>>> >>>>>> dhcp-nospoof >>>>>> net0 promisc-filtered rw off on off,on >>>>>> net0 allowed-ips rw -- -- -- >>>>>> net0 allowed-dhcp-cids rw -- -- -- >>>>>> net0 rxrings rw -- -- -- >>>>>> net0 rxrings-effective r- -- -- -- >>>>>> net0 txrings rw -- -- -- >>>>>> net0 txrings-effective r- -- -- -- >>>>>> net0 txrings-available r- 0 -- -- >>>>>> net0 rxrings-available r- 0 -- -- >>>>>> net0 rxhwclnt-available r- 0 -- -- >>>>>> net0 txhwclnt-available r- 0 -- -- >>>>>> >>>>>> -- >>>>>> With best regards, >>>>>> >>>>>> Vyacheslav Yakushev, >>>>>> >>>>>> Unix system administrator >>>>>> >>>>>> https://t.me/kelewind >>>>>> >>>>> >>>>> *smartos-discuss* | Archives >>>>> <https://www.listbox.com/member/archive/184463/=now> >>>>> <https://www.listbox.com/member/archive/rss/184463/27247476-87b4fc40> >>>>> | Modify >>>>> <https://www.listbox.com/member/?&;> >>>>> Your Subscription <http://www.listbox.com> >>>>> >>>> >>>> >>>> >>>> -- >>>> With best regards, >>>> >>>> Vyacheslav Yakushev, >>>> >>>> Unix system administrator >>>> >>>> https://t.me/kelewind >>>> >>> >>> >>> >>> -- >>> With best regards, >>> >>> Vyacheslav Yakushev, >>> >>> Unix system administrator >>> >>> https://t.me/kelewind >>> >> >> >> >> -- >> With best regards, >> >> Vyacheslav Yakushev, >> >> Unix system administrator >> >> https://t.me/kelewind >> > > > > -- > With best regards, > > Vyacheslav Yakushev, > > Unix system administrator > > https://t.me/kelewind > -- With best regards, Vyacheslav Yakushev, Unix system administrator https://t.me/kelewind ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
