Hello Ian,
Thanks for your response however these subnets are both in the same
infrastructure, the 192.168.1 is to the internet and the 192.168.10 is the
management network so the admin nic is on the .10 and the reason I am doing
g the firewall/Nat (internal) is to get the zones to see the
internet/external side.....I hope that clears things up a little.
Tha ks
On Sep 11, 2017 4:19 AM, "Ian Collins" <[email protected]> wrote:
> On 09/11/17 07:55 PM, Michael Cooper wrote:
>
> Hello Everyone,
>
> I have been reading about this issue for a couple of hours
> now, and yet to see a good resolution for it. I added an external nic on my
> SmartOS host in this manner (in /usbkey/config):
>
> # External Nic
> external_nic=0:15:17:a7:51:b4
> external_ip=192.168.1.2
> external_netmask=255.255.255.0
> external_gateway=192.168.1.1
>
> This will be able to see its gateway.
>
> <snip>
>
> "nics": [
> {
> "nic_tag": "admin",
> "ip": "192.168.10.254",
> "gateway": "192.168.1.254",
> "netmask": "255.255.255.0",
>
>
> If I'm not mistaken, it won't be able to see its gateway as they are on
> different sub-nets.
>
> --
> Ian.
>
> *smartos-discuss* | Archives
> <https://www.listbox.com/member/archive/184463/=now>
> <https://www.listbox.com/member/archive/rss/184463/29197591-a2127e31> |
> Modify
> <https://www.listbox.com/member/?&;>
> Your Subscription <http://www.listbox.com>
>
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
