Hello to all. I have successfully setup a master-slave configuration in my enterprise internal network.
Now I want to do the same thing for a measuring setup which expands across firewall zones. Two slaves exist in different DMZs in the firewall targeting hosts in the same zone with fping and the master is in the internal zone (local zone), gathering the data. I have managed to establish primary communication between master and slave and the slaves connect to the master and receive their configuration. The problem is I get no data back in the graphs. Before I changed them into slaves the smokeping servers in the DMZ were hitting their targets without problems and their graphs were populated, but that led to three different servers/web-interfaces for me (two in the DMZs and one in the local zone). I would prefer getting everything in one web interface so that is the reason for transition to a master-slave setup. I am guessing that I am missing something in the transport of measured data back to the server, so I would like to know if possible how do the slaves send their data back to the server after they are done measuring. I know the communication for the reception of their configuration is http traffic. Is it the same for the measured data? I must also say that I don’t get any significant info from my firewall’s logs. Is it possible that the transfer is smtp? Or is that the failed messages alerts (which I never see)? If anyone has any ideas I would be gratefull. Or my last choice is to use a sniffer and try and find out what is going on.. Ioannis Theodoridis PS: Thank you Darren Murphy for the ‘nomasterpoll’ answer. ============================================================================================================== Με την επιφύλαξη παντός νομίμου δικαιώματός μας. Κάθε μήνυμα ηλεκτρονικού ταχυδρομείου από την Τράπεζα της Ελλάδος (ΤτΕ) αποστέλλεται καλόπιστα αλλά δεν τη δεσμεύει ούτε ερμηνεύεται ως να συνιστούσε ή επηρέαζε συμβατική ή άλλη δέσμευση της ΤτΕ. Το μήνυμα ηλεκτρονικού ταχυδρομείου προορίζεται προς αποκλειστική χρήση του προσώπου, του οποίου η διεύθυνση αναγράφεται στην επικεφαλίδα του μηνύματος. Ο αποστολέας και η ΤτΕ δεν αναλαμβάνουν καμμία ευθύνη για ανακριβειες, παραβίαση της ακεραιότητας, απώλεια ή καθυστερημένη διαβίβαση του μηνύματος, για αστοχία, διακοπή ή υποβάθμιση της υπηρεσίας ή του μηνύματος καθώς και για κάθε εξ αυτού του λόγου απώλεια ή ζημία καθόλη την υπό του νόμου προβλεπόμενη έκταση. Εάν λάβατε κατά λάθος το παρόν μήνυμα ηλεκτρονικού ταχυδρομείου, παρακαλούμε να ειδοποιήσετε αμέσως μέσω ηλεκτρονικού ταχυδρομείου τον αποστολέα και να διαγράψετε το μήνυμα. Οποιαδήποτε ανακοίνωση, διάδοση ή χρήση μέρους ή ολόκληρου του μηνύματος χωρίς άδεια απαγορεύεται αυστηρά και μπορεί να επιφέρει ποινική και αστική ευθύνη. Any e-mail message from the Bank of Greece (BoG) is sent in good faith but shall neither be binding nor construed as constituting or affecting a contractual arrangement or other commitment by the BoG. The e-mail is intended for the exclusive use of the person whose e-mail address appears in caption as recipient. The sender and the BoG decline liability for inaccuracy, breach of integrity, loss or delayed delivery of the message, for any failure in, interruption to or degradation of either the service or the message, as well as for any loss or damage sustained thereof to the fullest extent provided by law. If this e-mail was not intended for you, please notify the sender immediately via e-mail and delete it at once. Any unauthorized disclosure, dissemination or use, either in whole or in part is strictly prohibited and may give rise to both criminal and civil liability. All rights reserved. ==============================================================================================================
_______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
