Would you paste here the completed log? with -Dsmslib.debug option, maybe there is a clue with constructed PDU.
Aryo Sanjaya On Sat, May 2, 2009 at 08:24, Sri <[email protected]> wrote: > > I would like to add that I can send only up to 20 characters. Sending > message fails for anything above than 20 characters. Any suggestions? > > > On May 1, 4:01 pm, Sri <[email protected]> wrote: > > I thought about it too. I restricted mine to alphabetic characters. > > Event then it had the same problem. > > > > On May 1, 2:45 pm, Thanasis <[email protected]> wrote: > > > > > Are you using any special chars or something? > > > For example, if you try to send 35 zeroes (0), does this fail as well? > > > > > On May 1, 10:40 pm, Sri <[email protected]> wrote: > > > > > > Yes it is Falcom's Samba 75. I have used different baud rates ranging > > > > from 9600 to 115200. Nothing works. The same error persists. > > > > > > On May 1, 2:16 pm, Thanasis <[email protected]> wrote: > > > > > > > Hello, > > > > > > > This is the one, right? > http://www.falcom.de/products/mobile-data/samba75/ > > > > > > > What baud rate are you using? > > > > > Can you test with a low one (for example 19200) and see if this > error > > > > > persists? > > > > > > > On May 1, 9:35 pm, Sri <[email protected]> wrote: > > > > > > > > I use SMSLib 3.4.1. The most recent version. > > > > > > > > On May 1, 10:19 am, Aryo Sanjaya <[email protected]> wrote: > > > > > > > > > Hi, > > > > > > > > > What SMSLib version do you use? > > > > > > > I just remember the PDU length calculation error on old > version. > > > > > > > > > Aryo Sanjayahttp://facebook.aryosanjaya.net > > > > > > > > > On Fri, May 1, 2009 at 21:23, Sri < > [email protected]> wrote: > > > > > > > > > > I am not sure if it is a modem problem or settings problem or > the > > > > > > > > encoding problem. If I send a text message that is more than > 30 > > > > > > > > characters or so, I am getting a CMS 549 Error which is > "incorrect PDU > > > > > > > > format". Below 30 characters everything works fine. I am > using the > > > > > > > > default 7-bit encoding. Any suggestions? > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SMSLib User Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/SMSLib?hl=en -~----------~----~----~----~------~----~------~--~---
