@Aryo: The "-Dsmslib.debug" option does not exist in the current
version...
@Sri: please use a string of 40 zeroes ("0") as the message, try to
send it and post the log.
On May 2, 4:27 am, Aryo Sanjaya <[email protected]> wrote:
> Would you paste here the completed log? with -Dsmslib.debug option, maybe
> there is a clue with constructed PDU.
>
> Aryo Sanjaya
>
> On Sat, May 2, 2009 at 08:24, Sri <[email protected]> wrote:
>
> > I would like to add that I can send only up to 20 characters. Sending
> > message fails for anything above than 20 characters. Any suggestions?
>
> > On May 1, 4:01 pm, Sri <[email protected]> wrote:
> > > I thought about it too. I restricted mine to alphabetic characters.
> > > Event then it had the same problem.
>
> > > On May 1, 2:45 pm, Thanasis <[email protected]> wrote:
>
> > > > Are you using any special chars or something?
> > > > For example, if you try to send 35 zeroes (0), does this fail as well?
>
> > > > On May 1, 10:40 pm, Sri <[email protected]> wrote:
>
> > > > > Yes it is Falcom's Samba 75. I have used different baud rates ranging
> > > > > from 9600 to 115200. Nothing works. The same error persists.
>
> > > > > On May 1, 2:16 pm, Thanasis <[email protected]> wrote:
>
> > > > > > Hello,
>
> > > > > > This is the one, right?
> >http://www.falcom.de/products/mobile-data/samba75/
>
> > > > > > What baud rate are you using?
> > > > > > Can you test with a low one (for example 19200) and see if this
> > error
> > > > > > persists?
>
> > > > > > On May 1, 9:35 pm, Sri <[email protected]> wrote:
>
> > > > > > > I use SMSLib 3.4.1. The most recent version.
>
> > > > > > > On May 1, 10:19 am, Aryo Sanjaya <[email protected]> wrote:
>
> > > > > > > > Hi,
>
> > > > > > > > What SMSLib version do you use?
> > > > > > > > I just remember the PDU length calculation error on old
> > version.
>
> > > > > > > > Aryo Sanjayahttp://facebook.aryosanjaya.net
>
> > > > > > > > On Fri, May 1, 2009 at 21:23, Sri <
> > [email protected]> wrote:
>
> > > > > > > > > I am not sure if it is a modem problem or settings problem or
> > the
> > > > > > > > > encoding problem. If I send a text message that is more than
> > 30
> > > > > > > > > characters or so, I am getting a CMS 549 Error which is
> > "incorrect PDU
> > > > > > > > > format". Below 30 characters everything works fine. I am
> > using the
> > > > > > > > > default 7-bit encoding. Any suggestions?
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"SMSLib User Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/SMSLib?hl=en
-~----------~----~----~----~------~----~------~--~---
