I copied that file into one of the directories which are in classpath ... An idea would be to copy it into the folder holding class files ( NOT src files )
I don't know how to configure Netbeans ... On Thursday, August 16, 2012 1:24:12 PM UTC+3, Bruno Moreira wrote: > > I used setStorageLocation because I saw this discussion > https://groups.google.com/forum/?fromgroups#!searchin/smslib/String$20index$20out$20of$20range$20/smslib/7QL_NPigsw4/AMrey1ugp6QJ%5B1-25%5D > > > I was unable to get log4j working, I added the library to the project and > placed log4j.properties(that came with the smslib-v3.5.2\misc\Log4j Sample > Configuration) next to my src files, but I can't get rid of these messages: > > log4j:WARN No appenders could be found for logger (smslib). > log4j:WARN Please initialize the log4j system properly. > log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for > more info. > > > As you told me I removed the getAtHandler().setStorageLocations();, and > added the delete sentences: > > https://code.google.com/p/cr0vax-sms-lib/source/browse/trunk/SMSGateway/src/pt/ipbeja/estig/ReadMessages.java > > > How can I put Log4j running properly? > > Quarta-feira, 15 de Agosto de 2012 18:24:44 UTC+1, MaxX escreveu: >> >> Can you also post the log4j log file smslib.log ? >> >> first step I would suggest to get rid of the gateway.getATHandler(). >> setStorageLocations(); >> >> there is a SMSLib-AsyncMessageProcessor thread which takes care of >> reading messages from time to time and reads from all memory locations >> something like >> >> 08-15-20:10:55,450 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: SEND >> :AT+CPMS="SM"(cr) >> 08-15-20:10:55,651 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: RECV >> :+CPMS: 0,40,0,40,0,40(cr)OK(cr) >> 08-15-20:10:55,651 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: SEND >> :AT+CMGL=4(cr) >> 08-15-20:10:55,851 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: RECV :OK(cr) >> 08-15-20:10:55,851 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: SEND >> :AT+CPMS="ME"(cr) >> 08-15-20:10:56,052 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: RECV >> :+CPMS: 0,99,0,40,0,40(cr)OK(cr) >> 08-15-20:10:56,052 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: SEND >> :AT+CMGL=4(cr) >> 08-15-20:10:56,251 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: RECV :OK(cr) >> 08-15-20:10:56,252 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: SEND >> :AT+CPMS="BM"(cr) >> 08-15-20:10:56,453 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: RECV >> :+CPMS: 0,20,0,40,0,40(cr)OK(cr) >> 08-15-20:10:56,453 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: SEND >> :AT+CMGL=4(cr) >> 08-15-20:10:56,652 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: RECV :OK(cr) >> 08-15-20:10:56,653 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: SEND >> :AT+CPMS="SR"(cr) >> 08-15-20:10:56,854 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: RECV >> :+CPMS: 0,40,0,40,0,40(cr)OK(cr) >> 08-15-20:10:56,854 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: SEND >> :AT+CMGL=4(cr) >> 08-15-20:10:57,053 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.AModemDriver - GTW: Modem./dev/ttyUSB1: RECV :OK(cr) >> 08-15-20:10:57,054 [SMSLib-AsyncMessageProcessor : Modem./dev/ttyUSB1] >> DEBUG org.smslib.modem.ModemGateway - GTW: Modem./dev/ttyUSB1: >> CheckMpMsgList(): MAINLIST: 0 >> >> Also I suggest to put inside the InboundNotification class the following >> line >> Service.getInstance().deleteMessage(msg) >> >> like this >> >> public class InboundNotification implements >> IInboundMessageNotification { >> >> public void process(AGateway gateway, MessageTypes msgType, >> InboundMessage msg) { >> if (msgType == MessageTypes.INBOUND) { >> System.out.println(">>> New Inbound message detected from >> Gateway: " + gateway.getGatewayId()); >> Service.getInstance().deleteMessage(msg) >> >> } else if (msgType == MessageTypes.STATUSREPORT) { >> System.out.println(">>> New Inbound Status Report message >> detected from Gateway: " + gateway.getGatewayId()); >> Service.getInstance().deleteMessage(msg) >> >> } >> } >> } >> >> On Wednesday, August 15, 2012 7:29:46 PM UTC+3, Bruno Moreira wrote: >>> >>> I'm almost sure that I have no messages to read! >>> >>> 1. I attached the SIM Card to a phone and deleted them all! >>> 2. I used the Modem software to read/delete all messages >>> >>> After that I tried to play a bit with setStorageLocations, and if I use >>> any of the following commands the error doesn't appear >>> gateway.getATHandler().setStorageLocations("SMME"); // >>> Sim Card Memory, Phone Memory, it can read old inbound messages, but can't >>> read new inbound messages >>> gateway.getATHandler().setStorageLocations("SM"); >>> // Sim Card Memory, Can't detect new inbound messages or read old ones >>> gateway.getATHandler().setStorageLocations("ME"); >>> // Phone Memory, same as SMME >>> gateway.getATHandler().setStorageLocations("MT"); >>> // Mututal, same as SMME >>> As I told in the code comments, it only appears to read messages using >>> the phone memory, which appears that the ZTE Modem saves the messages in >>> internal memory. >>> >>> But now I can't handle the new inbound messages, I started the >>> ReadMessages and followed these steps: >>> >>> 1. saw the message Now Sleeping - Hit <enter> to stop service >>> 2. from my phone, Sent a SMS to the modem >>> 3. Saw a blue flashing light in the modem, indicating that the SMS >>> has arrived >>> 4. The program doesn't react... it should detect new inbound >>> messages(it did it already, when I was able to use ReadMessages program >>> without setting storage location) >>> >>> If I restart the program, I see all messages that I sent to the modem. >>> Any idea? what am I missing in order to read new inbound messages? >>> >>> here is my code: http://pastebin.com/iUiDrbuD >>> >>> Thanks >>> Bruno Moreira >>> >>> >>> >>> I'm not sure if the ZTE modem has internal memory other then the SIM >>> Card. >>> >>> Quarta-feira, 15 de Agosto de 2012 16:41:04 UTC+1, MaxX escreveu: >>>> >>>> what kind of message are you reading ? is it way too biig ? >>>> >>>> >>>> On Saturday, August 4, 2012 10:15:32 PM UTC+3, Bruno Moreira wrote: >>>>> >>>>> I was able to run it properly, and it was running very well until now: >>>>> when I start the ReadMessage example it shows me this error: >>>>> http://pastebin.com/qxc0hs6F >>>>> I've read that it is a non text message that causes the error, but I >>>>> attached the SIM card to a mobile phone and deleted all messages and the >>>>> problem persists. >>>>> >>>>> Any idea? >>>>> >>>>> Sexta-feira, 3 de Agosto de 2012 16:05:13 UTC+1, Bruno Moreira >>>>> escreveu: >>>>>> >>>>>> Hi there, >>>>>> >>>>>> I've installed and imported the .jar library into NetBeans 7.01 >>>>>> libraries. >>>>>> Created a simple program: http://paste.org/52445 >>>>>> When I run it it displays this error: http://paste.org/52446 >>>>>> I'm using a >>>>>> http://flavioblogg.blogspot.pt/2008/12/modem-usb-3g-zte-modelo-mf632-no-debian.html >>>>>> >>>>>> What am I doing wrong? >>>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msg/smslib/-/wj9YYgOpjbgJ. For more options, visit https://groups.google.com/groups/opt_out.
