I suspect that there is a problem with those messages there which are
stored in SR
I suggest to comment the line where the message is printed out
116 msgList = new ArrayList<InboundMessage>();
117 Service.getInstance().readMessages(msgList,
MessageClasses.ALL);
118 for (InboundMessage msg : msgList) {
119 System.out.println(msg);
120 }
Because that's the point you application fails - at decoding the PDU
Or even better try to delete those messages instead of printing them ;)
But you have to do it for all memory locations ( you already figured out
how to do that :D )
PS: line numbers are from your v4
On Friday, August 17, 2012 2:12:44 PM UTC+3, Bruno Moreira wrote:
>
> Hi there,
>
> I tried it, and no error occurred, but I was unable to read the messages
> that are in memory(I had at least 3 messages unread, I think the Modem
> Dongle moves the messages from SIM to it's memory automatically, and that's
> why we can't reach them using SM Storage Location)
> here is the Log of the test: http://pastebin.com/1Eezm3Qm
>
> My last post showed that it crashed right after trying to use "SR" storage
> location, which points to Delivery Reports. I tried using AT commands to
> delete all messages from all storage locations, but the problem persists.
> During these researches I was able to find the available storage locations
> in my modem: +CPMS:
> ("ME","MT","SM","SR"),("ME","MT","SM","SR"),("ME","MT","SM","SR")
>
> Since the problem seems to be the "SR" location I tried using "SMMEMT"
> string(I know MT would do it all, but I tried it already
> without satisfactory results), and the result was the same as using just
> "MT", it was able to read the messages already in memory, but couldn't
> sense the new incoming messages(I sent a new SMS with the text "Teste 7" by
> 12:05), here is the log with that test: http://pastebin.com/7B7dCCkq and
> the "Teste 7" message was not sensed.
>
> I believe that the fact I've set the StorageLocation prevented it from
> sensing new incoming messages, what can I do for it to sense it?
>
> Sexta-feira, 17 de Agosto de 2012 11:00:55 UTC+1, Thanasis escreveu:
>
>> Add again the following:
>>
>> gateway.getATHandler().setStorageLocations("*SM*");
>>
>> and try once more...
>>
>> On 17 August 2012 11:54, SMSLib Discussion Group on behalf of Bruno
>> Moreira <
>> smslib+noreply-apn2wqe6zode8_fwbtjirjb7i2frwmulpffjei0y6hzy-h...@googlegroups.com
>> > wrote:
>>
>>> Ok Lo4j is running.
>>>
>>> By the time I got this logs http://pastebin.com/Dt64T9qv I had 2 SMS
>>> in the inbox [test1] and [test2].
>>> Also removed setStorageLocations():
>>>
>>> https://code.google.com/p/cr0vax-sms-lib/source/diff?spec=svn4&r=4&format=side&path=/trunk/SMSGateway/src/pt/ipbeja/estig/ReadMessages.java
>>>
>>>
>>> Quinta-feira, 16 de Agosto de 2012 20:41:24 UTC+1, MaxX escreveu:
>>>>
>>>> I copied that file into one of the directories which are in classpath
>>>> ...
>>>> An idea would be to copy it into the folder holding class files ( NOT
>>>> src files )
>>>>
>>>> I don't know how to configure Netbeans ...
>>>>
>>>> On Thursday, August 16, 2012 1:24:12 PM UTC+3, Bruno Moreira wrote:
>>>>>
>>>>> I used setStorageLocation because I saw this discussion
>>>>> https://groups.google.com/**forum/?fromgroups#!searchin/**
>>>>> smslib/String$20index$20out$**20of$20range$20/smslib/7QL_**
>>>>> NPigsw4/AMrey1ugp6QJ%5B1-25%5D<https://groups.google.com/forum/?fromgroups#!searchin/smslib/String$20index$20out$20of$20range$20/smslib/7QL_NPigsw4/AMrey1ugp6QJ%5B1-25%5D>
>>>>> **
>>>>>
>>>>> I was unable to get log4j working, I added the library to the project
>>>>> and placed log4j.properties(that came with the smslib-v3.5.2\misc\Log4j
>>>>> Sample Configuration) next to my src files, but I can't get rid of these
>>>>> messages:
>>>>>
>>>>> log4j:WARN No appenders could be found for logger (smslib).
>>>>> log4j:WARN Please initialize the log4j system properly.
>>>>> log4j:WARN See
>>>>> http://logging.apache.org/**log4j/1.2/faq.html#noconfig<http://logging.apache.org/log4j/1.2/faq.html#noconfig>for
>>>>> more info.
>>>>>
>>>>>
>>>>> As you told me I removed the getAtHandler().**setStorageLocations();,
>>>>> and added the delete sentences:
>>>>> https://code.google.com/p/**cr0vax-sms-lib/source/browse/**
>>>>> trunk/SMSGateway/src/pt/**ipbeja/estig/ReadMessages.java<https://code.google.com/p/cr0vax-sms-lib/source/browse/trunk/SMSGateway/src/pt/ipbeja/estig/ReadMessages.java>
>>>>> **
>>>>>
>>>>> How can I put Log4j running properly?
>>>>>
>>>>> Quarta-feira, 15 de Agosto de 2012 18:24:44 UTC+1, MaxX escreveu:
>>>>>>
>>>>>> Can you also post the log4j log file smslib.log ?
>>>>>>
>>>>>> first step I would suggest to get rid of the gateway.getATHandler().
>>>>>> set**StorageLocations();
>>>>>>
>>>>>> there is a SMSLib-AsyncMessageProcessor thread which takes care of
>>>>>> reading messages from time to time and reads from all memory locations
>>>>>> something like
>>>>>>
>>>>>> 08-15-20:10:55,450 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: SEND :AT+CPMS="SM"(cr)
>>>>>> 08-15-20:10:55,651 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: RECV :+CPMS: 0,40,0,40,0,40(cr)OK(cr)
>>>>>> 08-15-20:10:55,651 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: SEND :AT+CMGL=4(cr)
>>>>>> 08-15-20:10:55,851 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: RECV :OK(cr)
>>>>>> 08-15-20:10:55,851 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: SEND :AT+CPMS="ME"(cr)
>>>>>> 08-15-20:10:56,052 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: RECV :+CPMS: 0,99,0,40,0,40(cr)OK(cr)
>>>>>> 08-15-20:10:56,052 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: SEND :AT+CMGL=4(cr)
>>>>>> 08-15-20:10:56,251 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: RECV :OK(cr)
>>>>>> 08-15-20:10:56,252 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: SEND :AT+CPMS="BM"(cr)
>>>>>> 08-15-20:10:56,453 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: RECV :+CPMS: 0,20,0,40,0,40(cr)OK(cr)
>>>>>> 08-15-20:10:56,453 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: SEND :AT+CMGL=4(cr)
>>>>>> 08-15-20:10:56,652 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: RECV :OK(cr)
>>>>>> 08-15-20:10:56,653 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: SEND :AT+CPMS="SR"(cr)
>>>>>> 08-15-20:10:56,854 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: RECV :+CPMS: 0,40,0,40,0,40(cr)OK(cr)
>>>>>> 08-15-20:10:56,854 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: SEND :AT+CMGL=4(cr)
>>>>>> 08-15-20:10:57,053 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.AModemDriver - GTW:
>>>>>> Modem./dev/ttyUSB1: RECV :OK(cr)
>>>>>> 08-15-20:10:57,054 [SMSLib-AsyncMessageProcessor :
>>>>>> Modem./dev/ttyUSB1] DEBUG org.smslib.modem.ModemGateway - GTW:
>>>>>> Modem./dev/ttyUSB1: CheckMpMsgList(): MAINLIST: 0
>>>>>>
>>>>>> Also I suggest to put inside the InboundNotification class the
>>>>>> following line
>>>>>> Service.getInstance().**deleteMessage(msg)
>>>>>>
>>>>>> like this
>>>>>>
>>>>>> public class InboundNotification implements
>>>>>> IInboundMessageNotification {
>>>>>>
>>>>>> public void process(AGateway gateway, MessageTypes msgType,
>>>>>> InboundMessage msg) {
>>>>>> if (msgType == MessageTypes.INBOUND) {
>>>>>> System.out.println(">>> New Inbound message detected
>>>>>> from Gateway: " + gateway.getGatewayId());
>>>>>> Service.getInstance().**deleteMessage(msg)
>>>>>>
>>>>>> } else if (msgType == MessageTypes.STATUSREPORT) {
>>>>>> System.out.println(">>> New Inbound Status Report
>>>>>> message detected from Gateway: " + gateway.getGatewayId());
>>>>>> Service.getInstance().**deleteMessage(msg)
>>>>>>
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> On Wednesday, August 15, 2012 7:29:46 PM UTC+3, Bruno Moreira wrote:
>>>>>>>
>>>>>>> I'm almost sure that I have no messages to read!
>>>>>>>
>>>>>>> 1. I attached the SIM Card to a phone and deleted them all!
>>>>>>> 2. I used the Modem software to read/delete all messages
>>>>>>>
>>>>>>> After that I tried to play a bit with setStorageLocations, and if I
>>>>>>> use any of the following commands the error doesn't appear
>>>>>>> gateway.getATHandler().**setStorageLocations("SMME");
>>>>>>> // Sim Card Memory, Phone Memory, it can read old inbound messages,
>>>>>>> but
>>>>>>> can't read new inbound messages
>>>>>>> gateway.getATHandler().**setStorageLocations("SM");
>>>>>>> // Sim Card Memory, Can't detect new inbound messages or read
>>>>>>> old
>>>>>>> ones
>>>>>>> gateway.getATHandler().**setStorageLocations("ME");
>>>>>>> // Phone Memory, same as SMME
>>>>>>> gateway.getATHandler().**setStorageLocations("MT");
>>>>>>> // Mututal, same as SMME
>>>>>>> As I told in the code comments, it only appears to read messages
>>>>>>> using the phone memory, which appears that the ZTE Modem saves the
>>>>>>> messages
>>>>>>> in internal memory.
>>>>>>>
>>>>>>> But now I can't handle the new inbound messages, I started the
>>>>>>> ReadMessages and followed these steps:
>>>>>>>
>>>>>>> 1. saw the message Now Sleeping - Hit <enter> to stop service
>>>>>>> 2. from my phone, Sent a SMS to the modem
>>>>>>> 3. Saw a blue flashing light in the modem, indicating that the
>>>>>>> SMS has arrived
>>>>>>> 4. The program doesn't react... it should detect new inbound
>>>>>>> messages(it did it already, when I was able to use ReadMessages
>>>>>>> program
>>>>>>> without setting storage location)
>>>>>>>
>>>>>>> If I restart the program, I see all messages that I sent to the
>>>>>>> modem.
>>>>>>> Any idea? what am I missing in order to read new inbound messages?
>>>>>>>
>>>>>>> here is my code:
>>>>>>> http://pastebin.com/**iUiDrbuD<http://pastebin.com/iUiDrbuD>
>>>>>>>
>>>>>>> Thanks
>>>>>>> Bruno Moreira
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I'm not sure if the ZTE modem has internal memory other then the SIM
>>>>>>> Card.
>>>>>>>
>>>>>>> Quarta-feira, 15 de Agosto de 2012 16:41:04 UTC+1, MaxX escreveu:
>>>>>>>>
>>>>>>>> what kind of message are you reading ? is it way too biig ?
>>>>>>>>
>>>>>>>>
>>>>>>>> On Saturday, August 4, 2012 10:15:32 PM UTC+3, Bruno Moreira wrote:
>>>>>>>>>
>>>>>>>>> I was able to run it properly, and it was running very
>>>>>>>>> well until now:
>>>>>>>>> when I start the ReadMessage example it shows me this error:
>>>>>>>>> http://pastebin.com/**qxc0hs6F <http://pastebin.com/qxc0hs6F>
>>>>>>>>> I've read that it is a non text message that causes the error, but
>>>>>>>>> I attached the SIM card to a mobile phone and deleted all messages
>>>>>>>>> and the
>>>>>>>>> problem persists.
>>>>>>>>>
>>>>>>>>> Any idea?
>>>>>>>>>
>>>>>>>>> Sexta-feira, 3 de Agosto de 2012 16:05:13 UTC+1, Bruno Moreira
>>>>>>>>> escreveu:
>>>>>>>>>>
>>>>>>>>>> Hi there,
>>>>>>>>>>
>>>>>>>>>> I've installed and imported the .jar library into NetBeans 7.01
>>>>>>>>>> libraries.
>>>>>>>>>> Created a simple program:
>>>>>>>>>> http://paste.org/**52445<http://paste.org/52445>
>>>>>>>>>> When I run it it displays this error: http://paste.org/52446
>>>>>>>>>> I'm using a http://flavioblogg.blogspot.**
>>>>>>>>>> pt/2008/12/modem-usb-3g-zte-**modelo-mf632-no-debian.html<http://flavioblogg.blogspot.pt/2008/12/modem-usb-3g-zte-modelo-mf632-no-debian.html>
>>>>>>>>>>
>>>>>>>>>> What am I doing wrong?
>>>>>>>>>>
>>>>>>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "SMSLib Discussion Group" group.
>>> To post to this group, send email to [email protected].
>>> To unsubscribe from this group, send email to
>>> [email protected].
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msg/smslib/-/W0k25MLGaNAJ.
>>> For more options, visit https://groups.google.com/groups/opt_out.
>>>
>>>
>>>
>>
>>
--
You received this message because you are subscribed to the Google Groups
"SMSLib Discussion Group" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
To view this discussion on the web visit
https://groups.google.com/d/msg/smslib/-/Tb09gF_SDv0J.
For more options, visit https://groups.google.com/groups/opt_out.
