Sam, et al I have a remote LaCie Hard Disk connected to the N600via Ethernet Powerline adapters.
The device still shows in the sidebar in the Finder (as it used to with the HomeHub) on my Mac but now won't list the volume through the N600 or mount on the desktop to enable transfer of files. Any clues? Thank again. On 10 Sep 2012, at 18:06, Sam - MacAmbulance wrote: > Hi Nigel > > Try the following : > > Connect your computer to the N600 with an ethernet cable, turn off wifi > Connect the N600 to the phone line with the supplied cable & ADSL microfilter > Browse to http://192.168.0.1 or http://192.168.1.1 whichever asks for a > username & password > Log in with "admin" as the username and "password" as the password > Go to ADSL Settings in the top left menu : > VPI : 0 > VCI : 38 > Multiplexing : VC based > DSL Mode : multimode > Click Apply > Go to Basic Settings : > Do your internet connection require a login : Yes > Encapsulation : PPPoA > Login : usually [email protected] (technically it doesn't > matter with BT Broadband but you need to put something in, if there's a > specific value it needs to be, call BT and ask for your ADSL connection > username & password) > Password : BT (same as above) > Click Apply > Go to Router Status, if all's well you should see : > Modem > Modem Status > Connected (if it says connecting then either you got > the settings in ADSL settings wrong or there's a problem with your phone line) > ADSL Port > IP Address > should be something other than just a dash (if > there's nothing there, you may have to call BT for the username & password to > use in the Basic Settings section) > You can also click on 'Connection Status' at the bottom of the page and it'll > tell you a reason : > "LCP is allowed to come up" means there's been no response from BT's servers > "CHAP Authentication failed" means you've got the password wrong (call BT for > it) > Go to Wireless settings and give your network a name & password, don't leave > it on the default settings. > Turn wifi back on and join your new network > > Hope that helps, in fact it's a fairly appropriate guide for anyone setting > up a NetGear router. Most ISPs will give you an ADSL username & password, > it's just BT that usually authenticate by the phone number instead. O2 > broadband uses quite different settings but still compatible with a NetGear > router in most cases. It's just Sky Broadband that restrict you to their > routers. > > Regards > > Sam > MacAmbulance > Providing affordable Apple & PC services > > Sam Mullen > 07747 778022 > http://www.macambulance.co.uk > [email protected] > > > On 10 Sep 2012, at 17:49, nigel proctor wrote: > >> Hello smuggers >> >> I am trying to install a Netgear N600 modem Router to replace my BT HomeHub >> 3 as I am fed up with the poor wireless connection. >> >> I am unable to establish an Internet connection due to the convoluted >> Netgear 'smart' wizard. >> Does anyone have any experience of using one of these and could offer sone >> help? ie, do I require login? ....didn't with the HomeHub >> >> >> TIA >> >> Nigel Proctor >> H T White & Co Ltd >> [email protected] >> 07792000619 >> ....sent from iPhone >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Sussex Mac User Group" group. >> To post to this group, send an email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/smug?hl=en-GB. >> > > > -- > You received this message because you are subscribed to the Google Groups > "Sussex Mac User Group" group. > To post to this group, send an email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/smug?hl=en-GB. nigel proctor [email protected] H T White & Co Ltd www.htwhite.com 07792000619 sent from iPhone -- You received this message because you are subscribed to the Google Groups "Sussex Mac User Group" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/smug?hl=en-GB.
