Yes, I have gone through the manual setup of the first user successfully. However, I've tried every combination of user name and password I could think of and none of them allow me to login.
Given that I've set up the first user using the email address I use for Ubuntu One, what should I use for login credentials for that user - what is the username I should use and what is the password I should use? Regards, Mike On Wed, Sep 7, 2016 at 5:02 AM, Jamie Bennett <[email protected]> wrote: > Hi Mike, > > On 6 Sep 2016, at 21:27, MikeB <[email protected]> wrote: > > I'm building a Ubuntu Core image using latest snapcraft to build a > 4.4-based kernel snap. > > I then use ubuntu-device-flash core 16 --channel=edge --kernel=$snap > --gadget=pc --os=ubuntu-core -o $IMG to create the image. > > I then have a script that converts the image file to an ONIE NOS installer > - but that's irrelevant. > > Up until this weekend, things were going pretty well. I could boot ubuntu > core on my target network switch, set up the Ubuntu profile, then login in > using ubuntu/ubuntu. > > I rebuilt this weekend and now I can still boot up and set up the Ubuntu > profile, but I can't login. The ubuntu/ubuntu doesn't work and I tried > every combination of my Ubuntu profile user that I could think of, but > can't login. > > > Recently we changed the first boot experience, removing the default user > (this is insecure if people forget to remove/change the password) and > instead we require that the device is set up manually. This process uses > console-conf and will walk you through setting up a first user (must have a > store account) and any network changes that may be needed. For this you > will need a screen and keyboard attached. We are looking at alternative > options to configure a device for people who do not have a screen and > keyboard attached but that is something for the near future. > > Regards, > Jamie. > > So, my switch is now pretty much a brick. > > Here's the last things on the console I see... > > [ OK ] Started Generate sshd host keys. > Starting OpenBSD Secure Shell server... > [FAILED] Failed to start Run snappy firstboot setup. > See 'systemctl status snapd.firstboot.service' for details. > [ OK ] Started Snappy daemon. > [ OK ] Started Network Service. > Starting Update resolvconf for networkd DNS... > [ OK ] Started OpenBSD Secure Shell server. > [ OK ] Reached target Multi-User System. > [ OK ] Reached target Graphical Interface. > Starting Update UTMP about System Runlevel Changes... > Starting Notify bootloader that boot was successful... > [ OK ] Started Update UTMP about System Runlevel Changes. > [FAILED] Failed to start Notify bootloader that boot was successful. > See 'systemctl status snapd.boot-ok.service' for details. > [ OK ] Started Update resolvconf for networkd DNS. > > > The first 'Failed' has been happening all along. But the second 'Failed' > is new to me. Usually, at this point I see some cloud-init/network-init > messages but that's not happening. > > I can't login, so I can't tell you what 'systemctl status' is for those > errors. > > Any help would be appreciated. > > Thanks, Mike > -- > Snapcraft mailing list > [email protected] > Modify settings or unsubscribe at: https://lists.ubuntu.com/ > mailman/listinfo/snapcraft > > >
-- Snapcraft mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/snapcraft
