On Sunday, July 31, 2005, 6:43:36 PM, Greg wrote: GW> Can anybody help me with a problem getting the persistent GW> mode to work with FireDaemon. I loaded the latest version, 1.7. GW> I believe I have everything setup correctly, the right .exe name, GW> authenicationxx and persistent in parameters. It starts to fire GW> up, then stops. Any hints?
Did SNF generate a log file? Were there any errors or warnings in the log file? If you execute the same command from the command line does it work? --- These are just basic things. I'm not very familiar with FireDaemon but it still pays to start with the basics ;-) You may also consider temporarily turning on the debug menu in the SNF .cfg file. If SNF is starting at all that may tell you why it stops. If you are not getting a log file from SNF (any log files) then chances are it has been called incorrectly so your command line settings are incorrect. That is, in general, SNF will almost always produce a log file - even if there are errors. If not then SNF probably did not run, or it rejected it's command line and exited right away. hope this helps, _M This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
