Pete: Yes it works from the command line with no problem. Do I need to stop the SMTP and declude config file before starting this as a service?
[EMAIL PROTECTED] ----- Original Message ----- From: "Pete McNeil" <[EMAIL PROTECTED]> To: "Greg Wanner" <[email protected]> Sent: Sunday, July 31, 2005 7:01 PM Subject: Re: [sniffer] FireDaemon > On Sunday, July 31, 2005, 6:43:36 PM, Greg wrote: > > GW> Can anybody help me with a problem getting the persistent > GW> mode to work with FireDaemon. I loaded the latest version, 1.7. > GW> I believe I have everything setup correctly, the right .exe name, > GW> authenicationxx and persistent in parameters. It starts to fire > GW> up, then stops. Any hints? > > Did SNF generate a log file? > > Were there any errors or warnings in the log file? > > If you execute the same command from the command line does it work? > > --- These are just basic things. I'm not very familiar with FireDaemon > but it still pays to start with the basics ;-) > > You may also consider temporarily turning on the debug menu in the SNF > .cfg file. If SNF is starting at all that may tell you why it stops. > If you are not getting a log file from SNF (any log files) then > chances are it has been called incorrectly so your command line > settings are incorrect. That is, in general, SNF will almost always > produce a log file - even if there are errors. If not then SNF > probably did not run, or it rejected it's command line and exited > right away. > > hope this helps, > > _M > > > > > This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html > --- > [This E-mail scanned for viruses by EWOL using Declude Virus] > > --- [This E-mail scanned for viruses by EWOL using Declude Virus] This E-Mail came from the Message Sniffer mailing list. For information and (un)subscription instructions go to http://www.sortmonster.com/MessageSniffer/Help/Help.html
