Hi Frank, the same code works fine with DES and AES128 protocols. so i am not sure what could be the problem. i did not change any other credentials except privacy protocol. let me know if you want me to enable any debugs or how can i share the packet captures(earlier the mail is bounced saying size is large).
Thanks Narayanarao On Friday, May 23, 2014 2:41 AM, Frank Fock <[email protected]> wrote: Hi Narayanarao, There must be an error on your site. I see no reason why GET and RESPONSE should work and TRAP shouldn't. Are you aware of the fact, that with traps and notifications, the sender is authoritative and not the receiver? Best regards, Frank Am 22.05.2014 10:11, schrieb NarayanaRao Yenduri: Yes Frank. after correcting it on sender side, i did not see the exception. but on the receiver side i did not see the trap. >when i enabled wireshark at sender side, i could see malformed packet error >(with privacy protocols - 3DES/AES192/AES256). but it is working fine with >DES/AES128. > > >any suggestions? > > >i attached wireshark captures, it bounced back because of big mail size. > > >Appreciate your quick reply. >Thanks >Narayanarao > > -- --- AGENT++ Maximilian-Kolbe-Str. 10 73257 Koengen, Germany https://agentpp.com Phone: +49 7024 8688230 Fax: +49 7024 8688231 _______________________________________________ SNMP4J mailing list [email protected] https://s16675406.onlinehome-server.info/mailman/listinfo/snmp4j
