Hi Narayanarao,
It works for others (including me). I will not investigate this issue,
unless you provide
two small sample programs (source code - unzipped) that reproduces the
issue on your site
(sender + receiver).
You can send the source code to [email protected] to avoid bounces.
Please note, that ZIP files might be dropped in mail junk.
Best regards,
Frank
Am 23.05.2014 06:21, schrieb NarayanaRao Yenduri:
Hi Frank,
the same code works fine with DES and AES128 protocols. so i am not
sure what could be the problem.
i did not change any other credentials except privacy protocol.
let me know if you want me to enable any debugs or how can i share the
packet captures(earlier the mail is bounced saying size is large).
Thanks
Narayanarao
On Friday, May 23, 2014 2:41 AM, Frank Fock <[email protected]> wrote:
Hi Narayanarao,
There must be an error on your site. I see no reason why GET and
RESPONSE should work
and TRAP shouldn't.
Are you aware of the fact, that with traps and notifications, the
sender is authoritative and not
the receiver?
Best regards,
Frank
Am 22.05.2014 10:11, schrieb NarayanaRao Yenduri:
Yes Frank. after correcting it on sender side, i did not see the
exception. but on the receiver side i did not see the trap.
when i enabled wireshark at sender side, i could see malformed packet
error (with privacy protocols - 3DES/AES192/AES256). but it is
working fine with DES/AES128.
any suggestions?
i attached wireshark captures, it bounced back because of big mail size.
Appreciate your quick reply.
Thanks
Narayanarao
--
---
AGENT++
Maximilian-Kolbe-Str. 10
73257 Koengen, Germany
https://agentpp.com <https://agentpp.com/>
Phone: +49 7024 8688230
Fax: +49 7024 8688231
--
---
AGENT++
Maximilian-Kolbe-Str. 10
73257 Koengen, Germany
https://agentpp.com
Phone: +49 7024 8688230
Fax: +49 7024 8688231
_______________________________________________
SNMP4J mailing list
[email protected]
https://s16675406.onlinehome-server.info/mailman/listinfo/snmp4j
