Hi Frank, Thanks for your reply. My configurations are correct as i run multiple times and it worked some run and failed in other runs to be more specific device A, B,C worked first run and Device D and E failed. in second run Device A,E,C are successful . For some device privacy protocol was not applicable and some device it was set.
> Date: Thu, 18 Dec 2014 20:45:35 +0100 > From: [email protected] > To: [email protected] > Subject: Re: [SNMP4J] snmp4j for multiple device > > Hi Brijesh, > > If you get an unsupportedSecurityLevel error, then you specified a > security level that is not supported > by your USM configuration. Basically, you will have to provide either a > privacy password and a > authentication password for the corresponding protocols in the > configuration. > > Best regards, > Frank > > Am 18.12.2014 18:10, schrieb Brijesh Kumar: > > Hi, > > I am running snmp4j request for 10 device parallel . I am using snmpv3 . > > If all devices is having same set of cred set it works fine. > > If any of this having different auth protocol (MD5 or SHA) or privacy > > protocol it fails . > > I am getting below error > > Message processing model 3 returned error: Unsupported security level > > > > Is there any way i can accomplish sending multiple snmpv3 request to > > different device parallely ? > > > > Regards > > Brijesh > > > > _______________________________________________ > > SNMP4J mailing list > > [email protected] > > https://oosnmp.net/mailman/listinfo/snmp4j > > -- > --- > AGENT++ > Maximilian-Kolbe-Str. 10 > 73257 Koengen, Germany > https://agentpp.com > Phone: +49 7024 8688230 > Fax: +49 7024 8688231 > > _______________________________________________ > SNMP4J mailing list > [email protected] > https://oosnmp.net/mailman/listinfo/snmp4j _______________________________________________ SNMP4J mailing list [email protected] https://oosnmp.net/mailman/listinfo/snmp4j
