Hello Mike,
> I've decided to re-cover my 2M Organic with Hobby Lobby Poly Cover
> since they advertise it's the same as Oracover. I was wondering if the
> covering adhesive will stick to the composite frame. If not, what can
> be used to augment the adhesive and what is the process for using
> additional adhesive.
Either SIG's Stix-IT or Coverites's BalsaRite work well, with my nod going
to SIG's product as it's a little stronger. For this type of application I
thin the Stix-It 1:1 with lacquer thinner. Most of the iron-on materials
stick to themselves without any additional adhesive so it's only necessary
to brush the thinned mixture on the composite areas you want the covering to
stick too. Let the Stix-It dry for twenty or thirty minutes and start
covering.
Hope this helps,
Jim Porter
Johnston Iowa USA
"The airplane stays up because it doesn't have the time to fall."
Orville Wright
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
Email sent from web based email such as Hotmail and AOL are generally NOT in
text format
