There is a silicone made specifically for electrical components. Unfortunately, it's hard to find and expensive for a small amount. RS used to carry it but no longer does. If the silicone has an acidic smell, i.e. it smells like vinegar, it will cause corrosion in electrical applications. I'd guess that's what happened to your servo. The electrical grade silicone doesn't smell like vinegar.
Like Jeff mentions, it's going to be tough to remove it from the surface. I recommend epoxy-ing the servos to a piece of balsa and then epoxy the balsa to the fuselage. That way you have a release film. Some people wrap the servo in masking tape and then epoxy the servo in place. I've done that too in certain situations. gv -----Original Message----- From: Jeff Steifel [mailto:[EMAIL PROTECTED] Sent: Thursday, June 22, 2006 12:18 PM To: Robert Samuels Cc: [email protected] Subject: Re: [RCSE] Problems with GE Silicone II I think it is a big mistake using silicone... Robert Samuels wrote: > I installed two JR 281 servos in a HL pod made of hybrid Kevlar/carbon > cloth using GE Silicone II... Then the servo quit working. No response whatsoever. > > I don't know if the servo failure is related to anything... > > Robert Samuels ............... St. Louis RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format

