The plastic tube for the Easy Glider antenna runs down the center of the fuselage. If you drill too deeply, you will drill right through that tube. I think that a 1.5-in.-long dowel is too long. I recommend a large-diameter dowel glued in as deeply as you can without severing the antenna tube.

-Dick

John Erickson wrote:
AJ,

On the Easy Glider you need to make a new tow hook.  Most common way is to
drill a 3/8" hole at the very rear end of the existing tow hook tray.  Glue
in a 3/8" x 1 1/2" dowel and thread a tow hook into that.  It will launch
steeper in the new configuration.

JE
--
Erickson Architects
John R. Erickson, AIA


From: AJ Bhatta <[EMAIL PROTECTED]>
Date: Tue, 27 May 2008 10:14:31 -0700 (PDT)
To: [EMAIL PROTECTED]
Cc: RCSE <[email protected]>
Subject: Re: [RCSE] "30 minute first flight on my new Cularis by Hitec/MPX)

Good to know. We have had some guys inquiring about
soaring and I think this foamie fits the bill. Has
anyone up there tried the 2M (glider) Easy Glider on
the winch? We tried this weekend but the CG was too
far forward. Congrats to Lee on his fantastic
achievement.
Regards
AJ

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that
subscribe and unsubscribe messages must be sent in text only format with MIME
turned off.  Email sent from web based email such as Hotmail and AOL are
generally NOT in text format

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and unsubscribe 
messages must be sent in text only format with MIME turned off.  Email sent from web based email 
such as Hotmail and AOL are generally NOT in text format

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and unsubscribe 
messages must be sent in text only format with MIME turned off.  Email sent from web based email 
such as Hotmail and AOL are generally NOT in text format

Reply via email to