Try this: remove the plug shell from the servo connectors, then cover the pins with 1/16" heat shrink. Plug the individual pins onto the RX. This saves more than you might think in the way of vertical clearance. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, November 28, 2000 8:29 PM Subject: [RCSE] Re: Hitec 555........was Servo pin block > << I want to convert a Hitec 555 Rx to have the servos > plug into the end. I have a Fury glider that a 555 will not fit if I have to > plug the servos in the top. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
