> Dean Wooldridge wrote:
> 
> I'm gonna build a hi-start and I have a few questions about the parachute:
> 
> 1.  Any recommendations on ordering one or building one?  I had one on order > but 
>evidently the postal service sprites ate it.

16" diameter circle of rip-stop parachute nylon material (not too
hard to find at fabric stores).  Sewing the shroud lines is the
hard part.  Basically, lay out at least 8 evenly spaced lines;
if you are really clever you'll use as single piece of looped
twine.  Sew the shroud lines to the material in such a way that
they can move freely, as they will change length under tension.
One way of doing this is simply doing a stich that wraps them
with thread.

Surplus stores sometimes have pilot chutes (pulls the main chute
out of the pack of a human parachute) of about this size, though
they tend to be heavier.

> 2.  Am I right that the ring on the top (apex) of the chute attaches to the plane?  
>So why then doesn't it open up during launch and screw things up?

Yes.  Tension on the line and ring prevents it from opening.

> 3.  Seems like I read a note somewhere that a streamer of some kind could be used 
>instead of a parachute - is this true?

Yes.  Very easy to make too.  Doesn't straighten out the line
very well like a parachute does, so you do end up walking more.

--
Andrew E. Mileski
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to