The tow ring attaches to the top of the parachute (or on a short line extending from it). The parachute shroud lines are generally connected to a ring which is itself connected to the main launch line. The parachute is therefore 'in-line' and when there is tension on the line, the parachute is held closed. When the model comes off the line, the tension is released and the chute opens. Why a chute, rather than a pennant? A chute will return the line closer to the launch point (assuming you are launching into wind). A pennant does work, but probably adds more drag on the launch and means longer walks to get the line.
 
Hope this helps. 
-----Original Message-----
From: Stefan Smets [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 07, 2001 12:40 PM
To: Dean Wooldridge; Soaring Newsgroup
Subject: RE: [RCSE] Hi-start Parachute - what's it for?

Could this question please be answered in public ?
 
Thanks,
Stefan.
 
> 2.  Am I right that the ring on the top (apex) of the chute attaches to the plane?  So why then doesn't it open up during  
> launch and screw things up? 
 
 

Reply via email to