Harley, you are welcome. -YK
----- Original Message -----
From: Harley Michaelis <[EMAIL PROTECTED]>
To: YK Chan <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Saturday, June 02, 2001 8:00 PM
Subject: Re: [RCSE] RDS on Slopers?
: YK. . .thanks for your contributions of today and yesterday.
:
: As also pointed out by engineer Steve Fujikawa in his material in the RDS
: website, if 30 degrees of aileron deflection will suit the purpose, the
: bend in the aileron shaft can be cut to 32 degrees. This results in a
: mechanical advantage that doubles the effective torque and resolution of
: the servo. This would be meaningful in higher speed applications such as
: slope racing. I know I am not expressing this in proper engineering
terms,
: but it may be better understood by some readers.
:
: Thanks for your support.
:
: ----------
: > From: YK Chan <[EMAIL PROTECTED]>
: > To: [EMAIL PROTECTED]
: > Subject: Re: [RCSE] RDS on Slopers?
: > Date: Saturday, May 26, 2001 7:03 PM
: >
: > Aileron force:
: > The moment force analysis I have seen so far are unrealistic, as it is
: > static based. Static based refers to wind tunnel condition at which
wing
: is
: > not flying (to be exact not in a dynamic condition banking at a certain
: > rate at a given aileron input). A static analysis will produce
horrendous
: > moment force demand that no popular servo can provide. Most writers of
: > subject are confused themselves between aero-static and aero-dynamics.
: We,
: > however, diligently follow their direction at face value.
: >
: > RDS understanding:
: > The aerodynamic force at the ailerons will oppose the RDS rod end
section
: > similar to the way we torque an Allen Wrench (hex key). Please also see
: the
: > transfer function (input degree vs. output degree) in spreadsheet
: > downloadable at Harley's web-site. The in/output transfer (90* bend) is
: > nearly 1:1 at low angle displacement and soon enters much less than
: unity,
: > beyond which produce increasing torque amplification. Such
: characteristics
: > is especially favorable to flap applications. On the other hand, RDS in
: > aileron application comes in with torque rod end section bend at 45*
and
: > this will provide even more torque amplification from input axis (the
: > servo) to output axis (the hinge).
: >
: > I trust you will enjoy your new RDS.
: >
: > YK
: >
: > ----- Original Message -----
: > From: Paul Klissner <[EMAIL PROTECTED]>
: > To: <[EMAIL PROTECTED]>
: > Sent: Saturday, June 02, 2001 9:46 AM
: > Subject: [RCSE] RDS on Slopers?
: >
: >
: > : What about gliders that take a lot of stress in flight?
: > :
: > : I actually have a bag of RDS couplers I bought from Harley,
: > : awhile back, intrigued with the concept, but have never used.
: > :
: > : The unverified concern I heard is that the axle that conveys
: > : the servo's force would be difficult to make rigid enough to
: > : avoid being spongy against the opposing torsional
: > : forces between the servo and the wind pressing hard
: > : on the control surface.
: > :
: > : In other words aillerons under a lot of force might not
: > : hold their position as strongly as normal linkages and would
: > : be spongy, at least relatively to the more conventional linkages.
: > :
: > : I'm not saying that this is the case for sure, as I've never
: > : tried it. I'm saying I've been warned, and the argument made
: > : sense to me, at least enough to want to exercise caution.
: > :
: > : Can anyone with practical experience and a clear understanding
: > : of this address that concern honestly and accrurately?
: > :
: > : -Paul
: > : RCSE-List facilities provided by Model Airplane News. Send
"subscribe"
: > and "unsubscribe" requests to [EMAIL PROTECTED]
: >
: > RCSE-List facilities provided by Model Airplane News. Send "subscribe"
: and "unsubscribe" requests to [EMAIL PROTECTED]
:
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]