Have you tried CRRC
http://www.charlesriverrc.org/articles/radio/tomhoopes_8103_reverse_differen
tial.htm
may help you.
Aneil
----- Original Message -----
From: James Osborn <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, March 31, 2002 5:14 PM
Subject: [RCSE] JR 8103 Reverse Differential?


>
> I tried this question on the JR yahoogroup - no response:
>
> How do you set up reverse differential with the 8103?
>
> The specific application is is for landing mode.  When the butterfly
switch is
> engaged for landing mode, crow is programmed, and the flaps are fully
deployed,
> the ailerons are biased in an upward position.  In this case, to preserve
roll
> authority while the flaps are fully deployed, you would like the aileron
> downward travel to be much larger than the upward travel - this is reverse
> differential.
>
> Some other radios have different differential settings for different
flight
> modes.  Since the 8103 doesn't support different differential values based
on a
> switch, presumably there is some mix one could use to accomplish this, and
the
> mix could be engaged by the butterfly switch.  Someone once told me that
you
> could use an AILE->AILE mix on the 783 to do this.  On the 8103,
AILE->AILE mix
> seems to either cancle aileron deflection or amplify it, but not change
the
> amount of differential in any way.
>
> Does anybody know how to do this?
>
> -- James
>                                                      .-------------_--.
>     James R. Osborn  *  [EMAIL PROTECTED]    |   \        / \ |
>   Up and Running LLC * http://www.upandrunningit.com |-.  \   _ /\\_/ |
>      Computer and Information Technology Support     |  '-.\ / \\/    |
>     (510) 377-4514 Office  *  (510) 232-2575  Fax    | ____' \_/      |
>                                                      `----------------'
> RCSE-List facilities provided by Model Airplane News.  Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]
>
>

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to