Aneil,
THANKS!! The exchange IS great.
For curious minds with lazy fingers, here is the answer from Tom Hoopes:
With the XP-8103, first make sure that you have the ailerons moving the correct
direction and the "crow deflection" is set in the Butterfly menu. Next, you will
need to select an un-used programmable mixer that can be enabled with the Crow
switch and supports FPRN as the master and slave. PROG.Mix6 does the above.
Enter the master as FPRN and the slave can either be FPRN or AILE. Hit the
select key unitl you reach the SW: location. Flip the CROW switch to the landing
mode. Toggle through the mixer enable settings until the mixer is activated (it
will either be BTFY1 or BTFY0, depending which position you have used for
landing settings in the Butterfly menu). With the landing stick at full travel,
scroll to Rate: in the PROG.Mix6 screen. While holding the aileron stick to to
left or right full travel, hit the (+) or (-) key until the opposite aileron
drops down to neutral. Move the stick the other direction and the opposite
aileron should then drop to neutral.
-- James
.-------------_--.
James R. Osborn * [EMAIL PROTECTED] | \ / \ |
Up and Running LLC * http://www.upandrunningit.com |-. \ _ /\\_/ |
Computer and Information Technology Support | '-.\ / \\/ |
(510) 377-4514 Office * (510) 232-2575 Fax | ____' \_/ |
`----------------'
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
