If you reversed the bed and black wires on the board that got o the reciever this is wrong. The wires on the motor and pot are the ones that need switched. Mike
----- Original Message ----- From: "RBothell" <[EMAIL PROTECTED]> To: "RCSE" <[EMAIL PROTECTED]> Sent: Wednesday, July 17, 2002 9:39 PM Subject: [RCSE] Servo Reversal > I just tried to reverse the direction of my HS81mg servo. I switched the Red > and Black wires on the pot and the red and black wires on the board per > instructions I read from Programming the JR 8103 for a 6 servo wing. When I > tried it, it did not work and got hot really quickly so I disconnected it. > I reversed the wires back to the original and the servo works perfectly in > the original direction. What did I do wrong? Thanks, Rick Bothell > Prescott Valley, AZ > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
