You have to reverse the outside pot wires and the motor leads. Sounds
like you may have reversed the power leads, but then it prob wouldn't have
worked when you corrected it. Did you re-center the pot?
.........bc ([EMAIL PROTECTED]
http://www.widomaker.com/~conk
Williamsburg, VA 23185
On Wed, 17 Jul 2002, RBothell wrote:
> I just tried to reverse the direction of my HS81mg servo. I switched the Red
> and Black wires on the pot and the red and black wires on the board per
> instructions I read from Programming the JR 8103 for a 6 servo wing. When I
> tried it, it did not work and got hot really quickly so I disconnected it.
> I reversed the wires back to the original and the servo works perfectly in
> the original direction. What did I do wrong? Thanks, Rick Bothell
> Prescott Valley, AZ
>
>
> RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
>"unsubscribe" requests to [EMAIL PROTECTED]
>
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
