Are you sure about that? On my 8U all that does is offset the throttle position where the butterfly mode will take effect. So, for example, if you set it to 90%, nothing will happen until you move the stick down below 90% of it's movement. It does nothing to change the actual position or offset of the flaps. Perhaps I'm missing something.
Les and Gypsy Stockley wrote: > > Your 8U already does this. Look in ADV menu, BFLY submenu, use the cursor > keys to go across to ABK, push throttle/flap stick to full up or desired > position, press both data input keys together, at full up stick it will read > 100% offset. Done and 2 spare mixes now. > If you do this on an already installed set up dont forget to disconnect the > flap linkages first! > Les. > > > From: "mpodder" <[EMAIL PROTECTED]> > > Subject: [RCSE] 9C 90 deg. flap > > > > To anyone using the new Futaba 9C. > > I am replacing my Super 8 with a 9C, from Servo City great price, > > that hasn't been delivered yet. On the Super 8 to get 90 deg flaps > > you had to use to mixers to off set chanels 5 and 6. Does this still > > have to be done on the new 9C or is the off set included in the > > butterfly mix? > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and >"unsubscribe" requests to [EMAIL PROTECTED] -- _____________________________________________________________ Brett Jaffee [EMAIL PROTECTED] R/C Slope and Power Homepage http://home.earthlink.net/~jaffee The Unoffical Extra 300 Home Page http://members.nbci.com/bjaffee/extra300/ OnTheWay Quake 3 Server Utility http://www.planetquake.com/ontheway _____________________________________________________________ RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
