This is the way I programmed my 8103 on my ASH-27. In fact, I have the retract and the tow release on one channel. It needs to be on the gear switch to drive AUX3. There isn't a way to disable that switch from driving AUX3.
My count of channels is like this (from memory): 1. Spoilers 2. Aileron 1 3. Elevator 4. Rudder 5. Aileron 2 6. Flap 1 7. Flap 2 8. Retract, tow release To use an 8103 for a picolario, you'd have to combine either the flaps or ailerons on one channel. -Ben At 11:03 PM 8/24/2002 -0600, C & C Hahn wrote: >I am in the process of trying to program my JR 8103 radio in a scale >4-meter ASH26 with a 9 channel NER-549X reciever. Problem is, I have >flaps, ailerons, spoilers, rudder, elevator, AND a retract. I have >everything programmed and working fairly well with crow, reflex, and >camber control, but I cannot seem to get the retract set up on any channel >but AUX3 (the only one available). However, with the retract servo >plugged into this channel the gear goes up or down when I flip the >butterfly switch on the upper-left side of TX. > >Help! this is maddening! Is there anybody out there who has set up a >scale ship with the above mentioned functions on a JR 8103 radio? Any >input would be greatly appreciated. Thanks in advance for your help. > >HahnSolo RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
