If you can find an Airtronics Infinity 1000, it will also do this. Fred -----Original Message----- From: Tripp Meister [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 24, 2002 6:26 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: [RCSE] Can the new generation of computer radios do this ?
The Multiplex 3030, 4000 and I believe the Royal Evo does too. You can assign any channel to any control serface. -----Original Message----- From: yclui_hk <[EMAIL PROTECTED]> [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 24, 2002 6:03 AM To: [EMAIL PROTECTED] Hi Guys, I am wondering if there are any radio transmitters out there that allows the user to program the mapping between the control slot number and the control function. My old ( 10 years + ) JR computer radios have got the following slot assignment : Slot 1: Throttle Slot 2: Aileron Slot 3: Elevator Slot 4: Rudder As I am flying sailplanes, the throttle / gear controls are useless to me but I do need the AUX1 control very often as most of my sailplanes have seperate servo for each aileron. That means the receivers I use must support no less than 6 channels ( Thro, Ail, Elev, Rudd, Gear, AUX1 ) and this requirement has been restricting my choice of receivers. What I would like to have is a radio transmitter that allows me to swap the AUX1 and throttle control slot at the so that I can use a 4- ch receiver in the following manner : Slot 1: AUX1 Slot 2: Aileron Slot 3: Elevator Slot 4: Rudder Is this supported by the new generation of computer radio transmitters ? Thanks in advance , Y C Lui RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
